Viewing all customer Discussions for:

Closet

I am looking for a nylon bushing that rides along the bottom track of a mental bi fold closet door. I have added a picture of the bushing and the dimensions. We ordered 2 tracks from you recently (21-403 - 6 foot opening.

I ordered 16 pivot clamps 21-154 tonight. I'm assuming they will work with the pins in my doors. The o/s diameter is 5/16". I'm also needing some pin caps for the 5/16" pins Do you sell these caps individually? If so I'd like to order some. Part #? Thanks for your assistance with this. Terr ... (cont.)

Need the clip that holds a spring for the top rail stop

What do I need to make this bi-fold door work smoothly?It scrapes and is difficult to open and close.Thank you very much.MikeI will send pictures of track also. Perhaps that needs replacing too.

The mirror sliding door has a sticker on the back Buchmin Industries Its the upper H style Slide with Rectangular Plastic Slide (not the Bottom Wheels) Have a replacement Part? Don't see it on your web page

Hi there, This roller assembly is spot welded to the bottom of the door so it cant be easily replaced. Do you just sell the wheels by themselves? If I had new wheels I could probably drill out the old ones that are riveted and use a bolt and nuts to reinstall the new ones. Your thoughts/suggestions ... (cont.)

Do you have a replacement for these mirror sliding closet doors? Thanks Jason

This is a pivot in the track at the top of a bifold door. It has a plastic latch to hold the catch on the pin. The one in the photo is ok, but the latch on the other door has broken. Please advise how I can obtain a replacement.

Good afternoon,Looking for replacements for this Medalist FRONT 1 5/8 REAR 3/4 piece with 7/8" diameter. Want to order 2 to keep things symmetrical.What would you recommend?Thank you and greetings,Jaap

this isc the part i need

I have metal framed closet doors & need to replace 3 missing wheels. Do you sell these (see picture). Thank you

Please confirm that track 23-240 is the proper replacement for the track. Attached are pictures of the track and roller. Thank you!

I'm looking for something like this. Can you help?

I have a 47inch long by 2.5" in wide track that I need to replace I can't find any anywhere Plz help.

Hi,Please let me know where I can buy these either online or at a store in Oslo, Norway. 4 pieces are needed to carry the two sliding doors and 3 pieces are broken.Sincerely,Tore

I am looking voor this artikels. Can you help me to find the Stanley 4012 en 4050. Kind regards Monique

I have 2 doors, I needs all the hinges replaced/hardware. In the photo there is a model or serial number stamped on it. The doors do not sit on the track, and some parts are missing, not sure what I need. How much for all the parts?

Hello- I have several old metal bifold doors in a 1966 house. No markings for brand that I can find. Each pivot and track guide uses an oval piece to hold the pin in place, but several have broken. The first photo shows the bottom pivot piece with a broken "oval", the second shows the opening in ... (cont.)

The Black plastic corner connector in attached photo is your part #23-409. I need the part # for the pivot(?) that is circled in red. Thank you. Troy

I need the piece that hold the door shut on top rail