Viewing all customer Discussions for:

Closet

Can i replace my stanley rollers for ones that hang on the trail?

Hello I?m trying to find these parts for a mirrored sliding closet door.

broken plastic wheel . Replace entire unit? or the insert (body of insert measures 1 1/2 x 1/2 inches)

2 foot by 6 feet six inches

I have two sets of metal bifold doors that are old and don't work well. They don't stay in their nylon clips, are hard to open and shut, etc. I think the tracks are still okay, so I want to get all new pins, springs, nuts, and nylon clips for top and bottom rails (I assume you can replace those by r ... (cont.)

Buying replacement top closet wheels from you. Do you have replacement guides. Painters broke old guides. Thanks Bob

I look for one of these since I rented the house. The people bend it to the point where it can't be used by any chance you guys have one of these

Needs some help locating these plastic wheel guides the mirrored closet slider. Your help would be greatly appreciated.

Will these work with John Sterling Wardrobe mirrored closet doors (circa 2009)? I'm looking to replace the gunky ones in the attached photo. Thanks! Hannah

What tracks would these rollers use?

I'm trying to re- install 3 sets of Cox bi-fold doors in my daughter's house. She was left with the doors and complete top tracks (I think). The hardware in the tracks is stamped with 43-051. He are pics of the top & bottom of the doors and what was left on the tracks. Any help with the install proc ... (cont.)

Can you please tell me if you have this pin? Its for a metal bifold closet door. Thanks

The screw is stripped so I am unable to adjust any more. Please advise parts needed to fix.Thanks,Jim H.

hi Swisco Staff, Can you please assist as I would like to purchase a pair of closet door rollers. The roller devices I would like to purchase have an offset of 1/4", this is the distance from the edge of the device on the door to the vertical bar going to the roller wheel. The roller wheel is 3 ... (cont.)

Hello My mirrored closet door hangers by Stanley are actually still in good working order, only that some of the rubber roller guides have been lost. Do you sell the small rubber guides separately or only the full replacement part as in the discussion above? Thank you,

Hi there, Haven't found this part in our local hardware stores, so hope you can help me identify it and get a replacement. It is a spring-loaded post that goes on the top of the door. Thanks.

Do you sell just sell the screws for the roller assembly

I need the above-pictured part for residential aluminum bi-fold doors made in the 1950's. I would describe the part as the plate or pin that attaches to the door with a round nylon guide that fits into the track. I only need for two doors; i.e., one set of bi-fold doors. I hope someone can help and ... (cont.)

Hello. I am a homeowner and when I purchased my home, the master bedroom had these closet doors installed but not all the doors were hanging. I need replacement rollers as pictured as two are missing and several have seized bearings. The label on the door says Nordhal Cinderella Doors. ... (cont.)

Good afternoon Swisco,I'm looking for assembly and caster wheels parts for mirrored bifold closet doors from Swiss Mirror Company Florida. I believe they're out of businessnow. Part number on assembly is 100-98.Thank you,Curtis