Viewing all customer Discussions for:

Closet

Any idea if a thinner concave wheel could replace this part?

Having problems finding old roller, it has 3/4 offset, wheel appears to be 1 1/4 inch diameter, however thickness of wheel is 1/2 inch

bottom roller, metal frame mirror sliding closet door. Roller 1" Need help finding a replacementThanks in advance, John

I have a large closet with three 8ft tall mirror doors. The hardware is old and not in good condition and the doors are heavy. I'd like to update the hardware or even upgrade the whole track system if newer systems are interchangeable with the older doors. The upper rollers are lower guides are A ... (cont.)

I need to remove the glass doors and roller track system for rollers 23-041. I need to know how to remove the track at the bottom portion. I see tiny holes anywhere from 12 inches apart up to 16 inches apart. What?s the trick?

I am looking for 2 of these Mirrored sliding closet door concave

Hi ... I have a 48" polished brass bottom track looking to replace with the 23-240, in polished brass. The inner track to track distance of 1 5/8" is a match to my current and the 23-240. Would not seem to, but is there an issue if the full, current track width is less than the 23-240? 2 1/8" ... (cont.)

The part number on the plastic part of the part is 005024.The tag on the door has not serial number but does have the number 64564-001.We are missing one roller on one of the parts. Just one. The dimensions on the replacement at Home Depot is not the correct dimensions. Thank you, Shelley ... (cont.)

I lost a support part for my folding closet door.Now when I open and close the door, it's not supported and scratch against the bottom railing. I must lift the door by the door knob to open and close it.Nothing supports the door spring.valerie C

Hi, I need 12 of these. Please confirm price and S&H to 00959. Thanks, Lionel

Dimensions similar to #95-186

This is a picture of the pin on the top of my metal bifold closet door.

It has a school that sits on a slot that I shall sit up and down the weight of the door holds that rolling place in the bottom

Hello, After looking at the door tracks that you offer it appears the replacement track I need is your product # 23 - 272 which is a 71 inch sliding mirror door bottom track. Can you please let me know if you agree? Thank you Bill

Hi. I?m searching to replace a Stanley top roller to a mirrored-closet door. The current part is labeled Stanley 00-5024. I can?t locate it anywhere so I?m assuming it was discontinued. Do you know if a replacement part? Thanks

Hi! We're looking for the part pictured in the first photo. It's part of the top rail on the side. I've included a photo of the doors for reference. Thank you! Kerry

I,m looking for top and bottom nickel finish mirrored closet door tracks. I bought from Menards several years ago but they have been no help. I would need 72 inches long.

I need 2 of these style wheels for a sliding mirror door

Do you have hardware to match this ? Need 4.

What is the (OD) outer dimensions of the rollers on 23-222C? Model 23-222B shows 1-5/16", im looking for 1-7/16" to prevent rattle.