Viewing all customer Discussions for:

Closet

The ball is missing but I was able to remove the part containing the spring. I cannot find the size of the one installed and since the hole is bored into the door I need to find one the exact size. There is no manufacturer listed I can find. I recently bought the house which is 2 years old. The casi ... (cont.)

Do you have a replacement roller for the one pictured? It is installed on a mirror closet door. Thank you

I'm repairing some old metal bi-fold doors for a customer. A cat urinated on the doors and bottom track for years and caused major rust damage. I had to add sheet metal and angle iron to the door bottom. I'm hoping to replace the bottom track with 21-402, and pivot pin 21-002. The upper track has ... (cont.)

Need help to replace units

Ref: Stanley 4900 Series 30" wide Mirror Bifold I need to purchase all the track and hardware parts for this door. The Corner Connector part# is 23-409. After that, I need to order the top and bottom pivots, snugger, roll guides, brackets, top and bottom track, etc. Can you pls provide part #'s ... (cont.)

The above parts are for an older pocket door. I need the roller assembly shown in pic 47018. I need to know where to buy this part if it is still available. Thanks for your help!

we have the stanley works triple sliding mirror doors in bedroom. one door mirror is extremely loose and looks like missing a black part maybe a roller. serial number is 50315041can you tell me what i need to purchase to repair this door before the mirror falls out the other two doors have a black ... (cont.)

Hi! Bought a new track from you guys and of course my old door hardware doesn't fit! The doors don't have a hole for the types of pivots I see on your site. Am I missing something? Please advise! (Husband won't help me.) Thank you!

I have two doors that need the hardware replaced. Current hardware is mounted on the back of the door and roller extends above the centerline of the top of the door. Can't tall what size or type design to determine correct replacement. Compared to replacement set at h/w store and appeared to be 1/ ... (cont.)

The top part of the mirror is confusing to me, is there a way to convert/switch the top hardware to wheels so that it can be installed in a regular wheel tract?

Help! Nothing on your site looks exactly like this part from my bedroom closet. I've lived here over 13 years and it was taped like this before I moved in, but it's broken beyond a tape fix. (Condo was built in 1981 and these are original). The door won't stay in the track and flys open and is basi ... (cont.)

I am missing the long adjustment screw (with the spring) from my top bracket (17-4207-000). will the screw from 23-037 work or would I need to replace the whole assembly?

I can take photos of the bi-fold door and the bottom bracket if needed.The door is circa 1967, could be Pella. Please advise if the dimensions written on the photos are clear. Thank you!

Hi, I am looking for bottom part that holds the mirror and frame together. see attached photos. any help would be greatly appreciated

Looking for door handles for bifold doors

I have changed flooring from carpet to hardwood and the track for the 1975 closet door that I want to put back in place is about 1/4" too deep (or high) and the door cannot be lifted over it to be put into place. It appears to have been manufactured to be used with carpet. The height of the mine is ... (cont.)

We are looking for this bottom door tracks as well top track ,with rollers Thank you

Dear Sir or Madam,I am trying to identify and purchase parts in order to get metal bifold closet doors operating correctly in a homre that was built in 1970. I found an address to order parts from but I doubt if this is still valid. The address isPO Box 666Roseville, Michigan The tag states to refe ... (cont.)

want to find 12' track to replace joined closets model is 23-240

I need this bottom track. It is an old door Just need this part