Viewing all customer Discussions for:

Closet

Need to replace track and rollers on 2 bypass 4' mirror doors with no floor track. Appears the 23-247 door track will work but not sure which rollers since existing mounted on top and yours mount from side. Doors are 1" in width.

This picture shows the part that we need to replace for our mirrored bypass closet doors. It is marked "DNS". Your part #23-026 looks the closest to this that I can tell. Can you identify the best replacement part for us. We need 4, 2 for each set of doors. Thank you

I need to replace a missing corner top roller for my mirror closet door. It looks like from the other corner it is a Stanley 00-5024

I am looking to replace the hardware for these 8' sliding closet doors.

House was built 1990 thank you Stephen

I'm in need of 38-5' Low profile bifold door track/hardware. What is the overall height of the 21-452 60" track assembly? Including the top track and bottom guide Thanks Dave

We have a Stanley mirror sliding closet door with all main parts accounted for, but we lost the screws that held down this particular bottom track to the floor. What screws are required for this, and if no particular type is required what screws are best? It's worth noting that the holes where the s ... (cont.)

I am unable to find an exact match for the above roller. Will one of your others work? The wheels appears to only be 1 inch in diameter. Thank you

Posts are are 4.5" long and 1/4" at the top where the cap goes and 5/16" on the rest of the post body where it goes through the nylon guide bushings. All of the springs are good. It is the nylon guide bushings and caps that I need. Nylon caps fit on 1/4" dia Nylon guide bushings have 5/16" dia ho ... (cont.)

I recently moved into a house that has one bifold set of mirror doors and 3 sets of slider mirror doors. None of these doors have any handle on them. I see that you do have some handles. One stick on and 1 screw in. I'm having trouble envisioning where these would go but more importantly how exactly ... (cont.)

My client has an old (purchased about 10 years ago) Stanley brand Frameless Mirror Bifold (2' wide) in Japan. One of the photos is the Japanese catalog page for that line of doors. The other photo is the part that they need. Can you possibly ID and quote this?

My house was built in 1984 and I have Benchmark steel pivot doors on the closets. I need about 5-6. I need springs, caps, pins, and brackets

I need a replacement top pivot pin for some bifold doors. I don?t know the brand. The doors are about 20 years old. They fit into a 3/8 hole.

This seems to be very old Double rollers for it the grooves Need 120? total in white

Hello, I am looking for a replacement part for my bi-fold interior door. one side is functional (photo 2) I have the piece shown however I seem to be missing the "top" part that it brackets into the track.

I had a wheel break on the roller assembly. I got the replacement part, which is part 23-225. How do I remove the old assembly so I can replace it with a new one?

Require bottom sliding door closet hardware that has a worn out wheel for Oak trimmed mirrored door ( Acme ). Doors installed in 1986. Number on hardware. 4013. See photo. D121071The bracket is 2 1/4? wide x 4? high . Wheel is 1 1/4? diameter.Please provide update.

These rollers are on a 32"x 96" heavy solid core door the wheels are 3/4" centers. 15/16" outside. 3/4" wheels. 1 5/8"wide . Thank you

Used to be carpet now is tile owner still wants bottom track but once a bullnose or have it flush they don't stub their toes

I took the 2 panel door down to paint and misplaced the hardware and can't figure out how to get it back on track.