Viewing all customer Discussions for:

Closet

I need the top pivot which stabilizes the door . The pivot guide pin is OK.Enclosed is a pic.Hopefully this will clarify .

Markings on the hardware COX 21-717 21-767 21-718 Thank you

We bought an old house....it has sliding metal doors....hardware is shot.

No special markings really.

Hello,It's hard to be 100% sure, but your track looks a lot like our 23-241 60" and 23-242 72" track. Take a look at the dimensions and detailed images on our product page and see if you agree. Thank you!

Hello. I am in need of a bottom track and adjusting post for front edge of bifold mirror door. This is a 30" Monarch door circa 1985-1986.

Our door roller is brocken. As far as I can tell it's DSH 20121. Is it discontinued? With what can we replace it? Thanks

Need to replace track and rollers on 2 bypass 4' mirror doors with no floor track. Appears the 23-247 door track will work but not sure which rollers since existing mounted on top and yours mount from side. Doors are 1" in width.

This picture shows the part that we need to replace for our mirrored bypass closet doors. It is marked "DNS". Your part #23-026 looks the closest to this that I can tell. Can you identify the best replacement part for us. We need 4, 2 for each set of doors. Thank you

I need to replace a missing corner top roller for my mirror closet door. It looks like from the other corner it is a Stanley 00-5024

I am looking to replace the hardware for these 8' sliding closet doors.

House was built 1990 thank you Stephen

I'm in need of 38-5' Low profile bifold door track/hardware. What is the overall height of the 21-452 60" track assembly? Including the top track and bottom guide Thanks Dave

We have a Stanley mirror sliding closet door with all main parts accounted for, but we lost the screws that held down this particular bottom track to the floor. What screws are required for this, and if no particular type is required what screws are best? It's worth noting that the holes where the s ... (cont.)

I am unable to find an exact match for the above roller. Will one of your others work? The wheels appears to only be 1 inch in diameter. Thank you

Posts are are 4.5" long and 1/4" at the top where the cap goes and 5/16" on the rest of the post body where it goes through the nylon guide bushings. All of the springs are good. It is the nylon guide bushings and caps that I need. Nylon caps fit on 1/4" dia Nylon guide bushings have 5/16" dia ho ... (cont.)

I recently moved into a house that has one bifold set of mirror doors and 3 sets of slider mirror doors. None of these doors have any handle on them. I see that you do have some handles. One stick on and 1 screw in. I'm having trouble envisioning where these would go but more importantly how exactly ... (cont.)

My client has an old (purchased about 10 years ago) Stanley brand Frameless Mirror Bifold (2' wide) in Japan. One of the photos is the Japanese catalog page for that line of doors. The other photo is the part that they need. Can you possibly ID and quote this?

My house was built in 1984 and I have Benchmark steel pivot doors on the closets. I need about 5-6. I need springs, caps, pins, and brackets

I need a replacement top pivot pin for some bifold doors. I don?t know the brand. The doors are about 20 years old. They fit into a 3/8 hole.