Viewing all customer Discussions for:

Closet

This seems to be very old Double rollers for it the grooves Need 120? total in white

Hello, I am looking for a replacement part for my bi-fold interior door. one side is functional (photo 2) I have the piece shown however I seem to be missing the "top" part that it brackets into the track.

I had a wheel break on the roller assembly. I got the replacement part, which is part 23-225. How do I remove the old assembly so I can replace it with a new one?

Require bottom sliding door closet hardware that has a worn out wheel for Oak trimmed mirrored door ( Acme ). Doors installed in 1986. Number on hardware. 4013. See photo. D121071The bracket is 2 1/4? wide x 4? high . Wheel is 1 1/4? diameter.Please provide update.

These rollers are on a 32"x 96" heavy solid core door the wheels are 3/4" centers. 15/16" outside. 3/4" wheels. 1 5/8"wide . Thank you

Used to be carpet now is tile owner still wants bottom track but once a bullnose or have it flush they don't stub their toes

I took the 2 panel door down to paint and misplaced the hardware and can't figure out how to get it back on track.

Bottom rollers are 2012X-IR. Top rollers are 00-5024 I have 2 sets of 3 x 26? doors. I would like to purchase 12 of each. I have plastic pieces that have fallen out. They are the plastic ?heeled? shaped outer piece without the circular part in the last picture. Where did it come from? ... (cont.)

Hi. In my rv, the mirrored sliding closet doors always come out of the tracks and drives my wife crazy. The pictures are of the top and bottom tracks and the top and bottom guides. Can you please help? I will replace all tracks and guides if need be. Thanks

looking for glide-all wem 177-2 and guide to go with sliding closet door. Also needing the tracks as well as the metal frame to go around the door to insert the roller and guide into. Closet Door Roller with wheel is 1" or just under, metal Frame for Roller is 7/8" wide, close to 6" long Closet D ... (cont.)

Upper and lower pivots for two stanley 24 inch mirrored doors. They are separate, not set up as a 48 inch door. Has upper and lower tracks. I need all the pivot hardware to fit in the plastic corner blocks to adjust them to open and close properly.

Dear sir,I am searching a spare part for Stanley 17-4264-000 (see picture). Do hou have this item?Kind regardsJos

Thank you for your excellent service and products! I just ordered a bunch of window balances and associated parts. Please look at the attached pictures and let me know if/how to adjust this type of auto-close door hardware so that it works again.

I need bottom track from old glass bifold door

We have a Slimfold Closet Door (two folding on each side/ four parts total) which is for our Manufactured House Washer Dryer Closet. The spring/pivot/"gizmo" which is on the track at the bottom, needs replaced, and I have no idea, how to find a part number or anything. The sticker, I saw just had "S ... (cont.)

Hi, I'm trying to find a dsh-20121 roller/hanger. Do you have a replacement part for this? Thanks!

Rectangular plastic sliders are breaking at top of door. I have 6 doors. Any replacement parts?

I have the original part # for the bottom roller assembly on this door. The part # is 4016. I have attached a picture of the part

Hi I have been trying to find another wheel like this one in order to put up my tenants closet. I haven't been able to come across the correct whee so I am hoping I can reach you through this site. My name is Justin. I need to get another wheel because my tenant has been living without her closet do ... (cont.)

Hi, would you happen to recognize or have these rollers?