Viewing all customer Discussions for:

Closet

Hi, I'm looking to replace two pieces of mirrored closet door bottom tracks, each 5 ft. long. They are two door tracks, originally made by Stanley. The wheels are Stanley 4011, which have rollers that go in a T-Slot. See attached images. The distance between the two doors' tracks is 1 5/8". When b ... (cont.)

Hello, I require a roller part per the attached. What's the process from here and is there documentation as to how this part gets changed out? Thanks, Chris.

Does this look like your #23-233? House was built in 1994 and need replacements. Thanks in advance for your help! Mike

Please confirm that product 23-042 is the replacement item I need.

Looking for replacement parts for metal bi-fold doors. Need pins, springs and pin secure clip. Pin is about 4 1/2 inches

One set is 23-047 The other set is picture p

I posted three pictures of these rollers. They are bigger than your roller Item #23-285. Also, the slide clips are different. Please let me know if you have these and the cost. I will need 10 of them. Thank youMolly

Let me know if you have this replacement part, see pics. Thank you

I have Monarch Bi fold mirror glass closet doors in need of a part for the top.

Looking for replacement nylon slider bushings for moving guide rail pins upper and lower for a Model "D" Metal Bi- Fold closet door. Pins seem to be fine but bushings have worn through and fallen off so doors open and close roughly. Regards Harley

I need new sliding closet door hardware. Please see photo. The top part of the plastic piece broke off on most of them.

I need 4 top rollers & 4 bottom rollers. I need a price. Here are pictures of top & bottom rollers. Please reply soon, thanks, Ken

I recently purchased a house that was built in 1974 and it has the old metal bifold closet doors that 36? and on 72 inch guide top and bottom i need bifold kit for pivot top and bottom

We just moved into our house and found that the bottom track for the sliding glass mirror closet doors was installed over the carpeting. We're having new carpet installed up to the track, not under it and need to adjust the top guide. Can you please explain how to do that? Thank you. ... (cont.)

I have a pair of heavy mirror closet doors. They are four feet wide. As you can see in the attached photo the door roller assembly is spot welded in, and it has concave rollers. The part of the assembly which holds the roller is 1 3/4 in by 1/2 in . I am hoping this part of the assembly which I ... (cont.)

Hello, Can you help me with a replacement roller for this bifold door?

Just wanted to know if you carry or can advise what tracks are needed for these doors.

We're looking for pin caps for Evans Products Company bi-fold doors model B. Total height is 0.42", outer diameter is 0.37", and the rod is 0.30" diameter. The bottom flange on the cap is just under 1/2" in diameter.Do you have a model that would replace that? Please let me know if there are any que ... (cont.)

During a remodling project our mirrored closet door track and bottom rollers were lost. Can you help us find replacements? I am including a photo of the top roller as well as the space where the bottom roller used to be installed. The screw holes are about two inches apart. We'll need a bottom track ... (cont.)

T have wooden mirrored doors. I have a 1 1/2 cut out to fit the roller assembly to fit in. I need more information on the measurements of the 23-070 to see if will fit my doors. Thanks,Fred