Viewing all customer Discussions for:

Closet

can you get the roller part separate? we have a bunch of these but the plastic rollers are notched, the bearings are worn out, but the jacket that holds the 4 screws are in great shape.

I am trying to identify and obtain proper closet door replacement roller hardware for the system depicted in the attached sketch. The original brackets are missing on the outer door so I am not sure of their exact configuration. The OD of the existing inner door roller is 1 1/16" and it is 1/4" wide ... (cont.)

this is a rather old track. a renovation was completed and the track was "misplaced". the track guide is 2.5" wide and the wheels track at 1.5" apart. I thought that a photo of the wheel guide would help.

Morning - we are trying to source a replacement option for this roller - it is an old abracadabra wardrobe - Doric used to produce the rollers however they no longer do - the roller is convex rounded profile - any assistance would be appreciated - your carriage 23-233 might work if we cut the top wi ... (cont.)

Mirror wardrobe door roller assembly item # 23-041

Hello, I am looking for Spring Loaded upper roller guide 23-093. Do you still carry this item? or is there an equivalant?

Goes on top of my closet door.

As you can see these tracks are a mess and need to be replaced. please let me know if you have a 47inch track that i could purchase Thanks Bonnie

I am looking for a upper and lower track for 50726992 240803

There is a scraping and grinding noise coming from my roller. I think that something has eroded. Let me know if this picture is enough to identify the part I need. Thanks!

Need to find replacement tab roller assemblies for closet door. Current assembly is 4" tall by 3" wide ( tab to tab).

Hi, I'm looking for some help to identify the track and hardware needed to install my wood bi-fold doors to my closet - I only have the bi-fold doors (no hardware at all). The opening from the inside trim is exactly 48" wide. The height from the floor up to inside top trim is 79-1/2". Thank you. To ... (cont.)

Looking for two replacement 46 1/2" track to fix Ramtrack hardware that went missing during a recent renovation. Likely ended up in dumpster. Can you help. See sample photo from different slider. Will take in brush nickle

Closet Mirror Door Top Roller. Do you have this one?

Hi there, We bought a house from the 50's and the closet door rollers need to be replaced. We need about six of these. Appreciate any help! Thanks, Tom

I think these need new track and rollers. jumps track and hard to roll. Bruce

I think I need new track and wheels. they keep jumping the track. rollers may work with new track 23-272. Can I get just a small piece of track to see if it will work? Bruce ps I have a second closet I'm sending in second email.

I need the top and bottom track for my Monarch mirrored sliding closet doors. The model stamped on the back reads 0529901

I need 4 mounting hardwares with 8 screws. Markings, To adjust loosen screws half turn. A shows top. STERLINGThe hardware measures...2 7/8" x 1 5/8" The roller measures 3/4"

I am trying to replace a hanging roller with 1" wheel with ball bearings. I tried plastic wheels on the PrimeTime N6512 but they do not roll nearly as easily. The door is 5' wide x 6' tall so it is heavy. Do you have a better solution....if so I would buy them.