Viewing all customer Discussions for:

Closet

Need bottom guide part to Sliding Closet Doors *(Plastic Piece that goes over the wheel)

mirrored sliding closet door worn rollers

Hello, I was referred to you for a part on our Stanley Monarch mirror sliding doors series 329 Medallion door. Please see attached the part we have on 3 wheels but missing 4th part so sliding door was very difficult to slide now we know why.

Please see the attached picture. The part says "U.S. PAT. 4850145." The part is at least twenty years old. I need to buy two of these to restore my sliding door to its former glory. Thank you.

I have mirrored doors that are not staying in the track. The bottom sliding door mechanism has no visible roller. I also don't see a way to remove it? No screws ?? And doesn't seem to snap off. The door was made by Consolidated mirror and door. Has the number 20121 on the part. What replacement sli ... (cont.)

Will your 23-209 Bypass Floor Guide work on my 2 doors that are 1-5/8 in. thick? If I set it at 1-3/4 in., this would provide 1/16 in. space on each side of each door

Does your 23-041 replace these? If so how much each? Can they be bought locally?

I am looking for a part that will fit over a metal shaft on the top of a mirrored glass bi-fold door. It does not appear to be spring loaded. I may need to remove the top metal channel that holds the door together to access the bottom of the shaft. If I could just replace the nylon/plastic part a ... (cont.)

Stanley works cliset door

The top guide on my closet door is missing. Do you have a replacement for it?

Need to replace bottom sliding door track for mirrored closet door. Width of original track is 2 1/4". Can I use the 2 5/8" track product 23-240 to replace 2 1/4"track? If not do you have a smaller track?

Looking for this roller or something that will work in its place. Thank you, Terry

Sliding door roller made by Nordahl in Burbank, CA. The roller diameter is 3/4 inch. Need a pair, better even 4 pieces

Not sure what this part is but it is like a 5 1/2 inch pin for a metal bi fold door

Hi I have a 3ft metal bifold door and would like to replace the top and bottom track and 4 pins. Based on the attache photos what would you recommend Thanks

Closet mirrors doors hardware

Looking to replace this older Stanley upper door glide for mirror bypass door. 00-5024 patent number, no other markings. Roller doesn't stay up in track, don't see any way to adjust. Only bottom glides adjust. Thank you for any help.

Dear Customer Care Would it be possible for you to help me find the right parts to fix my bi-fold mirror door made by Independent Mirror Industries Inc? Thank you for any assistance you can provide. Sincerely Lisa

Hi, I'm looking for the part of the picture attached. If the part is not found which part would replace the one in the picture.

Hello, Based on posting/pictures already on your site I have identified the bifold doors in my house as old style Slimfold. But I had some questions about the parts I need. Want to replace all the pins and brackets. Are the pins and brackets on the top same as bottom ? That is the pivot pins, guid ... (cont.)