Viewing all customer Discussions for:

Closet

the sliding plastic part at the top of door. cw rmb 3000

I need two of these. When the wheels are on I have 5/8 on center. Your 23-193 is close and would do, but I need the track. You don't sell a track and the kit that you have 23-252 is just a little too wide and throws off my spacing. Suggestions or can your shop manufacture something? You're probably ... (cont.)

Will the 23-241 replacement track work for a Stanley Works sliding mirrored door - #50816021 241410 - current track measures 3 1/2 In. Wide by 591/4 long??

17-4116 Part number Broke the black wheel while removing door. Thank you for your help.

I just submitted a picture of the top of my mirrored sliding doors. . I need to order the top track for doors. Please help Thanks Timothy

Attached are pics of the parts.They are from a metal bifold closet door.

I ordered 21-402 & 21-150 & 21-108 for a mirrored bifold closet doors. 21-108 does not fit in the track I ordered i talked to one of your reps and they said i need new pins and caps to fit the track she asked me to send pics of the old pins they. can you let me know what all i need to order to fit t ... (cont.)

pin is steel i/4" diameter, 4 1/2" long including nylon slider cap. Pin has two grooves 1/2" apart around the middle encircling pin is a spring 1 3/4" long, 5/8" in diameter for 1" narrowing to 3/8" at the othe end the spring floats free on the pin in the door channel through which the pi ... (cont.)

Stanley. U.S.PAT. 3750337

Hello Do you carry these tracks? If yes how I can other them

Im looking at your product 23-041. It's very similar to what I currently have for my stanley mirror door, however your product doesn't carry the plastic piece that goes on top of the wheel going across horizontally. Could you please let me know if you carry that plastic piece so that I can order thi ... (cont.)

Trying to fix a pocket door. Believe it was put in around the mid to late 70s. This is how it looks; the other one we have is broken. Appreciate the assistance! Best, Jule

Looking to replace this Stanley part number 17-4116. Thank you. It's for a wood framed four foot mirrored sliding closet door

Sorry for the first photo. I could not figure how to delete it or the photo of the spring. I need 2 sets of part J & K from the part list. Can you help me with this.

I am needing to replace a few of these in an older home and I don't really want to re install all new tracks. The plastic roller has broken and I tried to pop out the rivet and replace it with a tub roller but that was off by 1/8" and made the doors rub. The markings on the hardware says GRANT ROC ... (cont.)

Is the below photo of a mirror door roller Your model 23225? Can you please confirm so I can place an order Thanks

Spring loaded roller for folding closet door.

One side of closet won't stay on the track

do you sell this part? I want to use it instead of a bottom track for installing some slimfold bifold steel louver doors

Trying to figure out what parts to buy for top and bottom stationary and the ones that move also need plastic parts that go into track .basically need all the parts