Viewing all customer Discussions for:

Closet

How do you adjust 23-113? I tried turning the nut with pliers but it's tight in both directions and the pin doesn't move in or out. I wound up using the plastic version but I think the doors might be too heavy for that one.

Hi! My dresser drawers are not gliding smoothly on their wooden tracks. Is this lubricant stick intended for use on wood? Or is there a different product I should use instead? I have heard of rubbing the wooden track with wax paper, but I am looking for something easier to use.

I have several Slimfold Model "E" bifold doors that need replacement parts. The specific parts are the pivot pins and plastic caps. The doors should be from around 1985. The pins are 3/16" diameter on the end cap end, 1/4" pin diameter, and 6 3/8" long. What part numbers do I need for replacement? ... (cont.)

Can you tell me if any of your Hardware will replace the pictures I'm attaching? The wheel appears to be one inch in diameter. Do you think a 23-0 1 5 will work well? It is from a sliding door, probably built in the fifties , that had a piece of plywood that was sliding as the door Thank you ... (cont.)

There were plastic pieces in these that were broken, I need something to replace them with.

Hello, I'm looking for closet door wheel replacement.I got glass door made by Home decor innovation and one wheel assembly is missing.I send you images of this wheel and door mounting holes.Can you identify it and give me price? Thank you

It looks like the white part has a section at the bottom which is broken off. Do you recognize what part this might be and how I would go about replacing it? On another topic, your website looks amazing! We are going to use it as an example for our next site. So much good information, so well org ... (cont.)

I think 23-011 is exactly what just wore out on my wife's closet door but 23-012 looks very similar. What is difference between "front" vs "back" in descriptions? Thanks.

I have a closet with two folding doors. One side is missing the piece that fits in the top track of the closet socket casing. I have it but it is bent and cannot fit back in it.

Hi-This is a picture of the track I am looking for. It is wide and tall with a groove that is 1/2' wide. I need a length of 36". I would be willing to consider a solution that doesn't use a lower track and an independent mount for the stationary pin as I have the top track that would serve a ... (cont.)

Fantastic! I am so thankful to have something go so smoothly, it was a welcome change. The not so tough part was removing the old parts, but just cliping in your replacement parts and a few turns of the screwdriver for adjustment and it was done. I replaced my Stanley upper glide part # 00-5024 wit ... (cont.)

Trying to locate replacement part for Glide-all WEM-177-2. Part is about 5 3/4 from end to tip of ball. It's for top hung closet doors. Thank you for your help.

3/4 INCH DIA ROLLER ON A 1 3/8" THICK BYPASS CLOSET DOORS.

Do either of these products have an option that the insert is made of metal versus plastic? It appears that the original hardware I have is the 23-199 and the plastic housing that holds the roller in place broke ... hoping a metal insert would be more durable. Thanks

Looking for a replacement for the wheel on my sliding door.

Hi, We just bought a foreclosed house and one of the bifold closet door is missing the bottom pivot pin. I would like to verify if the following parts are the right parts to replace/fix this closet door. Bifold Door Guide Pin, Float-A-Way 21-022 Bifold Door Bottom Pivot Pin, Float-A-Way ... (cont.)

I need to replace my roller track with this product. However, the track in my closet is 60 inches. I plan to purchase the 71 inch track and cut it down. Do you have any recommendations on how to perform this so the edge is cleanly cut without deforming the track? Thanks,.

Do you have the 23-401 in nickel color? I'm looking for something other than brass.

Hi! I recently purchased a house with two closets with metal sliding doors. Unfortunately only one closet has a track to it, the other was just rolling on the hardwood (which has to be repaired). I am not able to find any replacement for the track, the house it from the early 50s. The track I have i ... (cont.)

My doors appear to have rollers similar to Swisco part #23-176, but would like to remove them and take precise measurements before ordering. The rollers have a flange or tab that appears to slide into a channel along the bottom portion of the door frame. I will need to separate the bottom joints o ... (cont.)