Viewing all customer Discussions for:

Closet

Here's a pic of the part I need along with the label on the back of the door. It appears to be the same as the one on your website and measures 3" from hole to hole. If you can identify it I would like to order a few. Thanks

Hello, I am looking for a replacement for the bottom mirror door roller. Bottom Mount BB Roller Assembly (Product Code: 23-225) and Mirror Door Bottom Roller, Convex (Product code: 23-199) both look identical to what I have. The demensions of both of these parts are the same. Not sure which one ... (cont.)

Please see pictures. I have 2 sliding door closets. The tracks are badly bent. Also one door is missing. The track is about 3" wide and 71 inches long. Do you have it? The door is 36"x94". Do you have that? Please quote.

Hi - I have 2 metal bi-fold louvered doors; one of them is missing a couple of parts (I have pictures of the missing parts -- pictures + some comments added to them ... with the names of the parts maybe incorrect in the pics). 2 of the following (top of door): 6.5" pivot rod; 1/4" diameter; sp ... (cont.)

Dear Representative Trying to fidn something like the attached image

Can you tell me the width of the plastic guide for the above part number ? You have shown all dimensions except the width of the guide. Thank You,

Hi Question one: I see several replies from Swisco for the above match which is confusing me... For cox 21-767 swisco has 23-070 and another swisco Mirror Wardrobe Door Roller, Convex Product Code: 23-081 ... so is the 23-070 replaces cox 21-767 and also the swisco 23-081 ? Question two: I also ... (cont.)

I need two wardrobe mirror rollers cox 21-767(can carry more weight) is there a counterpart swisco for this

We are using 2 (two) ea. 36"x80"x1-3/8" pine doors for sliding closet doors. They will not be pocket doors, but slide behing the wall to the interior of the closet. Will the 23-242 work for this application? Please let me know. Thanks, Rodney

Dear Sirs Attached is a pic of a bracket I am looking for. The house was built in 1962. The bracket sits in a 1" wide channel (shown) and is approximately 3-3/4" long. The pin from the door sits in a plastic housing which is broken and so the door doesn't stay in place.. Can you let me know what ... (cont.)

My channel is warped and I want to replace it. It is 72 in long & 5/8 x 5/8 in OD measurements. Do you stock this? If so send quote, Incl shipping

Hi, I have 2 closet doors with 60 inch openings. The inside spring pin for the top doesn't move,it should be "springy" right? I am guessing that I would need 4 tracks, 2 top, & two bottoms? and four corner brackets and 4 springy pivots. The stationary pivot guides seem to be in good shape, and t ... (cont.)

I need one of the top guides show in pictures and a set of rollers for each door. I bought these second hand and they could not find these parts. The holes in the bottom of doors are at 1 1/2" on center and the plastic top guide screw directly in door. GARDNER glass products

I did some research online for a replacement roller for a sliding mirrored closet door. The only ID on roller is patent # 4850145 which led me to Charmac, Inc and then to Swisco # 23-233. After studying your drawings, I think that your # 23-028 might work better for me, as my roller assembly is 9/16 ... (cont.)

Trying to locate a replacement for the part reflected in the pics. Pic 1 = upper door guide (broken, needing replacement) Pic 2 = upper guide in position (broken one) Pic 3 = upper guide, NOT BROKEN

Not sure which one to order. Want the best quality replacement roller.

Hello, I can not find this mirrored door roller. I have found an almost exact match except the screw mounting tab has a bend in it. (see picture) Any ideas? Thank you, Ron

Need help locating the replacement part.

Hi, I am having difficulty with a hall door. Problem is I need a replacement roller that is slightly smaller than the 7/8" roller. I can't find it, then if I replace everything I can't find a 47" track length. Any advice? Thank you