Viewing all customer Discussions for:

Closet

Hi, Need a replacement for a broken glass door roller. Attached is a picture of a working one.

These pieces were located in the middle of the door height on the wall and looks like they are intended to stop or steady the folding door. Any idea what they are? Thanks!

Do you carry the single roller type roller similar to the tandem 23-236...? Thank you

See attached 3 pictures. The screws fell out of 4 of these closet door roller hangers. The stamping on the brass- colored part is "US PAT 3750337" The dimensions are 3 3/4" long, 1 3/4" wide, with a white 7/8" diameter roller. Is it possible to just buy the screws? If not, if I bu ... (cont.)

is it possible to join 4 panels 11 1/2 using standard 2 panel hardware. the opening is 42 in high X 8 ft long?

The track is 60' x 3 3/4'. Do you have something I can use to replace the old one. Thanks.

The mechanism that holds the bi-fold metal door in place in the top track is broken. Inside the door is a label that says: Evans Products Company Door Systems Division Roseville, Michigan 48066 Model "E" Door - Oct. 25, 1976 The metal unit that keeps the door in place will not tighten/secure wit ... (cont.)

I have two pocket doors that were formerly flat slab doors. We changed all of the doors to 6 pannel doors and now they sqeal and sqeak relentlessly. Can you suggest what the problem is? I am thinking the rollers are worn out. Your thoughts please. The rollers used are very similar to the 23-049. ... (cont.)

The rollers for these mirror closet doors are completely worn out,I saw a you have a set of wheels that are similar to the originals [ 23-064 ] my concern is will these wheels carry a 48" x 90" door and would also be advisable to incorporate a new track ? the closet opening is 8'-0" x 7'-7" high.tha ... (cont.)

Hi, I'm looking for my slid door roller. Can you please help me? Please see attached pictures. Length: 3.7'. Wide: 1.8". Thank you

Hi I have a triple mirror sliding closet door system that operated on a floor supported double track. This means that I can only have one door's width open at a time. I would like to switch this to a triple track system so that the opening can be enlarged to two door widths at any one time. I ha ... (cont.)

I want to replace Johnson wheel-sets with these. Existing track is 1 3/4"W x 1 1/4"H (Johnson). Will these fit? I don't see detailed dimension in advert (no width. Thomas

Could you tell me how one removes the assembly from the door? Are there screws, or do you tap it out. Please advise how to remove and install new assembly. Ira I

I would like to replace the hardware of some of my BiltBest casement windows. Here is a photo of the hardware that I removed from 3 of these windows, as the windows would no longer close with the existing crank hardware. The crank handles and the gear covers can be re-used, but that is all. Where ... (cont.)

I have bottom roller number 00-5024 I looking to find the bottom track 5" can you tell me if the Sliding Mirror Door Bottom Track Product Code: 23-242 will work and the cost plus shrimping to zip 33442 thanks *I bought this doors in home depot few year ago, and they do not have this trac ... (cont.)

Hello, We need to replace this track for 2 closets. Can you help me find the right track to use? Thank You, Carole

I have 70's era Benchmark steel bi-fold doors on my pantry. I need new hardware for them but I can't identify which parts I should order. Can you help. The doors are 60 inches wide by 79 inches tall (total of 2 doors and 4 panels total. Marilyn

Screws into Back of door...4 -5 screws needed...The base that screws into door is approx. 1 1/2 - 1 3/4 inches all around... Height of the roller attachment is approx. 1/2.. Thank you...

Need bottom pin looks like photo 5-7/16 " long x 1/4" pin OD with barrel spring type. The oneI have is missing spring and pin cap

I went to lowes and HD and I cannot find this part. Do you have it?