Viewing all customer Discussions for:

Closet

Looking for replacement part as described in photo attached. Can't seem to find a match on your site? Please advise. Thanks, Tom

The wheels are 3/4" Space between center of the wheels is 3/4" and left to right is 1" (wide of the track). Thanks!

I would like four (4) of these rollers to replace the broken ones on two closet mirror sliding doors. House is 22 years old. The markings on the roller: DEL MAR ENG. 448-3 My Mirror Door Roller Assembly looks similar to your Product Code: 23-043. One measurement was different, the ov ... (cont.)

Stanley/Monarch #on back-50105952 240803 Length is 48" long width is 3.5

i have a 94.5 inch closet in which i have four sliding glass Doors. The track is warped and I need new top and bottom tracks. I need them as soon as possible. Please have a sales person call me as soon as possible. Thank you Aaron

will item # 23-235 work where Item # 23-207was originally?

Looking for 2 pairs of the ACME 121 adjustable floor mounted bottom guides.

Good morning, I need two rollers manufactured by Stanley (?). I can see 2 ref. on the part: STANLEY 30-4015 on the brass part and 2012x-IR on the plastic part. Thank you for your help.

Hi, I am looking for this roller and bottom glide. The roller is a top mounted 7/8” diamiter , it is 5/8” wide and 3/8” deep and 2 3/4” long. The glide is 5/8” wide and 2” long. They are for a sliding mirror wardrobe doors. I don’t know the brand. They are at least 25 years old. Thank You fo ... (cont.)

I have a idea to use these in a non-door application. Need to know how far the spring loaded pivot pin protrudes above the flange of the barrel when fully depressed. Thanks

Hello! There is an additional part for your 23-079 that is the metal bracket that I'm also looking for. It's shaped like a "L" with four teeth on the bottom that fan out to snap into the 23-079, do you have this part too?? Debbie

Hello.. I need a bottom pivot pin like the one in the photo for a Leigh metal bifold door, model 8433. Please identify your part number. Thanks, Howard

Is it possible to get the 48" 23-240 in WHITE? Please advise, Thanks!

I typed in, "Monarch Mirror Door Co., Inc." and a post appeared on google from a customer relaying a message to this company. It was the same door I was looking for. They needed a slider though. Apparently the company is out of business. I need one roller

Hello, I have two bifold doors that meet in the middle. One has a #23-130 spring to keep it on the upper track, but the other does not. I thought I just needed to add in another 23-130 for the other door, but when I installed it, it turns out the doors cannot close because then the two 23-130's a ... (cont.)

Good morning, I need to replace 2 58 1/2" bottom tracs for a set of sliding closet doors(plain/no mirror) Trac I have now is identicle to your pictures except mine has a little 3/8" high "hump". I assume for the concave wheels to ride on. Enclosing pictures of bottom trac and wheel assembly. Is/Wa ... (cont.)

Hi I'm looking for this part for my bifold doors. I need about a dozen. Can you help? Sorry there is no markings however they are from steel half vented half panel bifold doors with a wooden top and bottom track maybe late 1960s or early 1970s. I would be happy with new or used. Thanks ... (cont.)

I have looked at pin cap 21-106 for my 5/16 pin. Can you tell me if the bottom inside dimension of the cap is 5/16? The specs on that show only the top. If there is a lip on top this could be the one for my door. It is shown as a related part when looking at the pin with spring+cap or pin and cap as ... (cont.)

Hello, we need help identifying the attached hardware. It is approximately 3" in height, 1 5/8" wide and the wheel is approx 7/8" in diameter (convex). Only idenfifying marks are an 'F' on one side and a label that states 'To adjust, loosen screws half turn' on the other side. We purchased our ... (cont.)

I appear to have Roller# 23-041 on my sliding mirrors and the track is a mess and I want to replace it. The length is approx 72" and the width is 3 3/4". The current color is white but I'm open to other colors.