Viewing all customer Discussions for:

Closet

Can you tell me the width of the plastic guide for the above part number ? You have shown all dimensions except the width of the guide. Thank You,

Hi Question one: I see several replies from Swisco for the above match which is confusing me... For cox 21-767 swisco has 23-070 and another swisco Mirror Wardrobe Door Roller, Convex Product Code: 23-081 ... so is the 23-070 replaces cox 21-767 and also the swisco 23-081 ? Question two: I also ... (cont.)

I need two wardrobe mirror rollers cox 21-767(can carry more weight) is there a counterpart swisco for this

We are using 2 (two) ea. 36"x80"x1-3/8" pine doors for sliding closet doors. They will not be pocket doors, but slide behing the wall to the interior of the closet. Will the 23-242 work for this application? Please let me know. Thanks, Rodney

Dear Sirs Attached is a pic of a bracket I am looking for. The house was built in 1962. The bracket sits in a 1" wide channel (shown) and is approximately 3-3/4" long. The pin from the door sits in a plastic housing which is broken and so the door doesn't stay in place.. Can you let me know what ... (cont.)

My channel is warped and I want to replace it. It is 72 in long & 5/8 x 5/8 in OD measurements. Do you stock this? If so send quote, Incl shipping

Hi, I have 2 closet doors with 60 inch openings. The inside spring pin for the top doesn't move,it should be "springy" right? I am guessing that I would need 4 tracks, 2 top, & two bottoms? and four corner brackets and 4 springy pivots. The stationary pivot guides seem to be in good shape, and t ... (cont.)

I need one of the top guides show in pictures and a set of rollers for each door. I bought these second hand and they could not find these parts. The holes in the bottom of doors are at 1 1/2" on center and the plastic top guide screw directly in door. GARDNER glass products

I did some research online for a replacement roller for a sliding mirrored closet door. The only ID on roller is patent # 4850145 which led me to Charmac, Inc and then to Swisco # 23-233. After studying your drawings, I think that your # 23-028 might work better for me, as my roller assembly is 9/16 ... (cont.)

Trying to locate a replacement for the part reflected in the pics. Pic 1 = upper door guide (broken, needing replacement) Pic 2 = upper guide in position (broken one) Pic 3 = upper guide, NOT BROKEN

Not sure which one to order. Want the best quality replacement roller.

Hello, I can not find this mirrored door roller. I have found an almost exact match except the screw mounting tab has a bend in it. (see picture) Any ideas? Thank you, Ron

Need help locating the replacement part.

Hi, I am having difficulty with a hall door. Problem is I need a replacement roller that is slightly smaller than the 7/8" roller. I can't find it, then if I replace everything I can't find a 47" track length. Any advice? Thank you

Hi, Need a replacement for a broken glass door roller. Attached is a picture of a working one.

These pieces were located in the middle of the door height on the wall and looks like they are intended to stop or steady the folding door. Any idea what they are? Thanks!

Do you carry the single roller type roller similar to the tandem 23-236...? Thank you

See attached 3 pictures. The screws fell out of 4 of these closet door roller hangers. The stamping on the brass- colored part is "US PAT 3750337" The dimensions are 3 3/4" long, 1 3/4" wide, with a white 7/8" diameter roller. Is it possible to just buy the screws? If not, if I bu ... (cont.)

is it possible to join 4 panels 11 1/2 using standard 2 panel hardware. the opening is 42 in high X 8 ft long?

The track is 60' x 3 3/4'. Do you have something I can use to replace the old one. Thanks.