Viewing all customer Discussions for:

Closet

The mechanism that holds the bi-fold metal door in place in the top track is broken. Inside the door is a label that says: Evans Products Company Door Systems Division Roseville, Michigan 48066 Model "E" Door - Oct. 25, 1976 The metal unit that keeps the door in place will not tighten/secure wit ... (cont.)

I have two pocket doors that were formerly flat slab doors. We changed all of the doors to 6 pannel doors and now they sqeal and sqeak relentlessly. Can you suggest what the problem is? I am thinking the rollers are worn out. Your thoughts please. The rollers used are very similar to the 23-049. ... (cont.)

The rollers for these mirror closet doors are completely worn out,I saw a you have a set of wheels that are similar to the originals [ 23-064 ] my concern is will these wheels carry a 48" x 90" door and would also be advisable to incorporate a new track ? the closet opening is 8'-0" x 7'-7" high.tha ... (cont.)

Hi, I'm looking for my slid door roller. Can you please help me? Please see attached pictures. Length: 3.7'. Wide: 1.8". Thank you

Hi I have a triple mirror sliding closet door system that operated on a floor supported double track. This means that I can only have one door's width open at a time. I would like to switch this to a triple track system so that the opening can be enlarged to two door widths at any one time. I ha ... (cont.)

I want to replace Johnson wheel-sets with these. Existing track is 1 3/4"W x 1 1/4"H (Johnson). Will these fit? I don't see detailed dimension in advert (no width. Thomas

Could you tell me how one removes the assembly from the door? Are there screws, or do you tap it out. Please advise how to remove and install new assembly. Ira I

I would like to replace the hardware of some of my BiltBest casement windows. Here is a photo of the hardware that I removed from 3 of these windows, as the windows would no longer close with the existing crank hardware. The crank handles and the gear covers can be re-used, but that is all. Where ... (cont.)

I have bottom roller number 00-5024 I looking to find the bottom track 5" can you tell me if the Sliding Mirror Door Bottom Track Product Code: 23-242 will work and the cost plus shrimping to zip 33442 thanks *I bought this doors in home depot few year ago, and they do not have this trac ... (cont.)

Hello, We need to replace this track for 2 closets. Can you help me find the right track to use? Thank You, Carole

I have 70's era Benchmark steel bi-fold doors on my pantry. I need new hardware for them but I can't identify which parts I should order. Can you help. The doors are 60 inches wide by 79 inches tall (total of 2 doors and 4 panels total. Marilyn

Screws into Back of door...4 -5 screws needed...The base that screws into door is approx. 1 1/2 - 1 3/4 inches all around... Height of the roller attachment is approx. 1/2.. Thank you...

Need bottom pin looks like photo 5-7/16 " long x 1/4" pin OD with barrel spring type. The oneI have is missing spring and pin cap

I went to lowes and HD and I cannot find this part. Do you have it?

Looking for replacement part as described in photo attached. Can't seem to find a match on your site? Please advise. Thanks, Tom

The wheels are 3/4" Space between center of the wheels is 3/4" and left to right is 1" (wide of the track). Thanks!

I would like four (4) of these rollers to replace the broken ones on two closet mirror sliding doors. House is 22 years old. The markings on the roller: DEL MAR ENG. 448-3 My Mirror Door Roller Assembly looks similar to your Product Code: 23-043. One measurement was different, the ov ... (cont.)

Stanley/Monarch #on back-50105952 240803 Length is 48" long width is 3.5

i have a 94.5 inch closet in which i have four sliding glass Doors. The track is warped and I need new top and bottom tracks. I need them as soon as possible. Please have a sales person call me as soon as possible. Thank you Aaron

will item # 23-235 work where Item # 23-207was originally?