Viewing all customer Discussions for:

Closet

Hello, I am looking for 4 of these hangers with wheels. There are no markings on the hangers or on the track. These are for sliding closet doors from a home built in the 1950s. Thanks Brian

Need to get new track you can only been these old tracks so much and then part stop fitting right in track need replacement .

here is my problem. i have 40 year old metal bi-fold doors in all the closets. they are bolted together so they swing open like a regular door, so i don't use the pins on the mating edge of the doors, only the outside edge. on one door only, i can use the slot on the bottom pin and raise the door ... (cont.)

Need foyer mirrored door roller assembly replacements. The roller assembly is attached to the doors. The doors and assembly is over 50 years old. Can't find the roller assembly online. Is there a company that might make this?

House built in 60's

I am looking for the upper door guide for my sliding closet door. Is this something you would carry?

Hello Swisco Team, The sliding door roller shown in the attached photo is missing from one of the closet doors. Do you have a replacement? Thanks very much. Peter. Contractor from California.

part for Stanley Mirror Safety Sliding Closet Door for top i have picture of it thank you

I had ordered this part as it looks like the right one but my brother finally just tried to reinstall the closet door and it's not the correct cylinder inside. Evidently the one I bought from you, the cylinder isn't the same size all the way through... it gets wider as it gets lower. I'm attach ... (cont.)

This is setup for pocket door at a Health Imaging Center in California.We need new wheel Hardware, as a couple of wheels no longer roll.

I need a replacement for a top roller on bifold door. The top diameter of the roller is 5/8" the bottom is 3/8". The door is 1 1/8" thick The bracket is marked HAR VEY

I'm helping an elderly friend clean up her home and I want to fix this door. Should I replace the spring part?

I think the rollers are Bottom Mount BB Roller Assembly Product Code: 23-225 or Mirror Door Bottom Roller, Convex Product Code: 23-199I think the track I need is 72" Sliding Mirror Door Bottom Track 23-242 do you agree

Hi - These are 2 parts (4043-1, 4043-2) that attach on mirror panel sliding doors to keep the lower part of the door in the track groove. (The top part of the doors is on a roller in the track groove.) The 6853 photo is of the lower part of one of the mirror door panel, where these parts should att ... (cont.)

I have old metal bifold doors and I can't find parts for them. Wondering if you guys carry them, there are a lot of options on your website.

I have tow mirrored closet doors which came with the pictured wheels top and bottom. I need a 60 inch top and bottom rail and don't know which ones to get. Thank you for any help. Looking to get asap. Thanks

I know this is a long shot but figured it was worth a try. During a recent renovation of a built in 1960 home, the top pivot hardware for the bifold doors in one room were misplaced and lost. I'm trying to see if anything like this old style still exists or if there's anything newer that would be ... (cont.)

I hope these pictures are helpful, and I have been told that the manufacturer may have been Ducasse, but the truck slider on our 12 year old sliding door finally broke. I haven't had any luck tracking this part down on my home, and so my new friend at Home Depot suggested reaching out to see if you ... (cont.)

Hello , i would like to have a wider opening currently it opens to 18" the goal if possible is to open the door with a clear of 19 or 19.5 " if there is a smaller upper pivot that I could use to make the opening door to be wider ?

I have 9 bi-fold doors that were in a flood, swelling the bottoms, making the existing door guides too narrow to fit through. I either need larger door guides to allow the thicker door or adjustable door guides to do the same. Please help!