Viewing all customer Discussions for:

Closet

Hi I have 3 mirror sliding doors that need a new rail. The original rail is 124 inches long

We have a house built in 1951 missing one of these closet door rollers. They are mounted inside the metal frame of the door and the roller is angled to ride in the track. I haven't been able to find anything with the angled roller like this. I appreciate any suggestions you might have!! ... (cont.)

Hello, I have some very old closet doors and unfortunately they are not closing/opening properly as the pin that goes in the rail is missing or maybe is missing some subcomponents. I have attached a few photos of the closet doors, is there anyway you can let me know what is the pin or items I have t ... (cont.)

I have closet doors with tandem mounts. I need to remove these doors and cannot figure out how to release the mechanism to get the door off. Help.

Looking for replacement wardrobe rollers as pictured. Thank you!

I have 2 sliding bypass mirror doors in my bedroom made by Stanley. The track is pretty well distorted do you have a replacement. Thanks, Gerry

Pocket door from 1990s. Need replacement rollers as seen in picture

Looking to replace the hardware and tracks to the bifold doors at our new house. All of the tags are worn out so I can't find any information. Any help would be great. Thanks!

I cannot find this part anywhere. Can you help me identify? Is there a newer model roller that will work? The rollers came off bedroom closet doors (not mirrored) from home about 26 years old in California. Thank you. Gary

I need to replace some wheels.I need the part number for the attached pic.I do not recognize it on your webpage for single wheel sliding screen doors.Thanks,Mike

#4050j is the number on the sliding mirror bottom roller

Hi, I see the recommendation for replacement of Stanley 4405-R is your block 23-407. Can you tell me if the top (picture attached) and bottom pivot pins I have today in the old Stanley blocks will fit in that 23-407 block? They do look to be about 7/16" diameter, but they're six-sided, not round. ... (cont.)

Hi. I'm looking for replacement part for this top roller.This is for a friend. I'm looking either for wheels only or the whole part. Any help would be much appreciated.Thank you.

Hi. Is it possible to remove acme 4011 from the housing (4013 - 2)?Or alternatively, is it possible to only remove and replace the wheel?

I apologize I don't have a picture of the missing piece but I believe both sides of the door use the same piece. The front of the door is mirror, it is not a light door. It is bifold and has no back to close it in.

Please hel me find the exact part in the picture or replacement. NEED 4. THANKS

Swisco- I am in need of one of the u-shaped plastic pieces at the top of the photo and two of the plastic cylinders at bottom. These are from bifold doors that are probably 35 years old. Thanks, Joel

Have attempted to find part at Home Depot and Lowe's nothing close. The label shows the date of 1996. Time has worn out the plastic wheels.

liding Mirror Door Top Roller Guide. I'm just looking to replace the small plastic wheels. Where can I find them. Thanks

Can you match this closet roller? On the roller it has Stanley 3750337. Thank you