Viewing all customer Discussions for:

Drawer & Cabinet

I need a 3 pairs of groove mount drawer sliders. They need to be 1" in Width and 12-14" in length

Where can I buy replacement?

Bevel hinge

I need to find this hinge or a similar product that would work.

My parents broke a drawer pull on their china cabinet. Hopefully, you can find a replacement. Thank you. --Debbie

Need to know if you have these hinges. Homecrest from 2003. Plastic piece inside broken and doors don't stay closed. Something similar that could work maybe? It's a wrap around I think. Thanks. Pat

Sirs: Hinge 32-345 Can you provide the dimensions: (see red lines) Between A and C Between B and C Thank you Robert

We have H. J. SCHEIRICH KITCHEN cabinets with plastic drawers. The plastic drawers ride on a guide like the one pictured. I think they are from the '70's. We need at least one, but would by a couple backups if we found them.

need a few pcs of this to repair a bedroom dresser drawer. Cant find anywhere

This part goes under the sliding drawer to snap in.

Do you have this part?

drawer pulls model#43811-810 01 79

This roller/wheel is from an old Mayline flat file cabinet. It is 1 inch in diameter (or a hair over that) with a one inch screw. I see ball bearings?My local hardware store had nothing.:-) Any ideas on where I can source a replacement?

I have the metal runners but I need the plastic ends ( front and back) that hold the drawer in place as it is pulled forward and back. I have two drawers needing the replacement ends. I had a page from your site on my computer showing dimensions, but I somehow lost it. If needed, I will try hard ... (cont.)

I'm in need of a couple of these. Do you have them? I appreciate your help. Sheri

This is a hinge from cabinets that are about 30 years old. I want satin nickel if possible. Inside the diamond is USIP and below are patent numbers: 3205532, 3212124, 3255484 and 3568241 (The 3rd # looks like 84 or 64 at the end) Tiawan Thanks for any help you can give. Doris

These are plastic part located on the bottom of the drawers mark L or R that lock the glides in place. Without them the drawer come off the glides and falls forward.

We are needing some replacement hinges for our old cabinet doors. We have looked everywhere and cant find them anywhere. They are at least 25 years old.

Hi I am looking for drawer tracks or just replacement bearing rollers as shown in the picture. They are 15/16" diameter. They are marked NL CO and Quaker made on the tracks.

this is what i am looking for do you have?