Viewing all customer Discussions for:

Drawer & Cabinet

I need a replacement for kitchen cabinet back wall brace.

Looking for replacement socket for slider kitchen drawer. The broken piece has a number on the inside. That number is 471037

This plastic part is 2 inches wide and 7/16" deep for the cut-out. The top of the cut-out is 1 inch and bottom of the cut out is 1 1/4 inches It measures 1 1/2 inch to to bottom of the part on back of drawer.

The stamp on the rails says uni grass 6600. We need the back rail mount. You can see that it has a knob on the back to fit into the hole on the steel backplate. Please help!!!

Hi! I replaced this about a year ago, but the piece failed. I need to replace it again. I've attached the picture of the broken piece and the ones that are working. Please let me know what other information you need. Thanks!

Has 18003 on back of it.Its 2 1/4 inches wide.

I measured the kitchen drawer slide at exactly 22.5" but the parts only come in 22 or 24 at Lowe's or Home Depot. I need to replace the slides for a kitchen cabinet drawer. Can you help?

It is from a kitchen drawer that is over 14 years old. Their are no numbers or markings found on the existing hardware. The guide is on the center of the drawer

This plastic piece that I need screws into the outside wall and my pantry slider screws to the plastic piece. Please let me know if you can help me. Thanks

Looking for replacement drawer pulls fir my Thomasville dresser. On the back of the pull markings cont-b p- 7150-t

This guide is mounted at the top back of the drawer to keep it suspended as it slides under a captains bed. On the guide are the letters PMC 4. the entire piece measures 56mm (scant 2 1/4 inch)wide X 43mm (1 11/16)tall. The narrowest part of the opening at the top is 10mm(a scant 1/2 inch) the pla ... (cont.)

Hello ! We need one of these drawer parts. It came with our Project source cabinet we purchased from Lowe's.

Looking for this plastic bracket for cabinet drawer that broke. It has two plastic plug-in prongs protruding from the rear to go into back of cabinet.

I am looking for a kitchen cabinet hinge like this. If you have them or know where I can find any I need about a dozen of them. Thanks

Perfect size would be 3 inches long. Accomodate a 1 inch high track.

hello a few years ago we had our kitchen remodeled and unfortunately the contractor who did the job can't get ahold of him go figure he got his money a ran, anyway i've looked everywhere and have found similar pieces but these don't use screws and the only markings are the location marks cl,cr,dl,dr ... (cont.)

Looking for these identical hinges in flat black

rear drawer track socket pair

I need several of these. They are brackets for the drawer pull out in my cabinet.

Trying to identify this hinge for replacement