Viewing all customer Discussions for:

Drawer & Cabinet

I need to replace shelf clips in a kitchen cabinet that is 40 years old. Based upon previous posts I think the correct size is 32-303. Is there a minimum order and can I return in the event the size is incorrect? Thank you.

Need to replace bottom drawer glide/track on an Ashley dresser.

This hinge broke and I need to replace right away.Robert

Looking for bracket replacements

The rollers are 1-1/8 inch diameter and are 1/8 inch thick. They are riveted in, but could be bolted. These a Geneva brand metal cabinets.

this is from hinge from corner door, cardell cabinet

This corner cabinet hinge has broken. I purchased these HASS cabinets from HOBO probably 9 years ago. Can you supply me with two of these hinges?Barry

Trying to determine the right size

Need 2 of these

I need to replace this hinge

Looking for replacement part.

As best as I can measure, the post is about 1/8" wide, the roller wheel is about 3/4" in diameter and the width of the roller is about 3/16". As you can see, the roller is held on by a rivet or a cap. The photos above show what the roller looks like and what the post looks like. I would just replace ... (cont.)

I am unable to find any identifiable markings on this, can anybody help me find it?

Hi, Need help to confirm what replacement will fit my need. This piece is marked 60 1961 on the back. 3" long x 2 tall x 1.25" wide. drawer rail is 21.5". It looks like the 32-016 and I can cut it if required. But I would like to confirm my choice with your input. I will need two lefts (pairs). Than ... (cont.)

Hi Cabinets were installed in 1995. Haas Cabinets. As you can see from the picture, there is a round insert that fits in a metal connector which is riveted to the back of the cabinet wall. Do you have this part and or a recommendation for a replacement. Regards Brian

This piece shown in photo has no numbers name etc. it s plastic. I need identification so I can order. Home Depot and Lowe's are nearby. Will these stores carry parts? ThanksGeorge

These are Merrilat cabinets about 30 years old. If you can find the part I will get a couple of them.

Looking for drawer glide it's fully plastic drawer. Two for each drawer.

Please help me. I need the track and brackets.

I need replacement and can't find them.