Viewing all customer Discussions for:

Lavatory

We need to replace on two DRV Select Suites 5th wheels the sliding door roller assemblies.

fits in center of wall jambs. There are 2 of them. One on the right and one on the left. Sterling calls it a Wall bumper with a part #517502. Any help will be appreciated. Joe

Part is stamped Quality Enclosures -- Measures 2 3/8 inches long and approx 1 6/18th high on an angle -- I would appreciate any help

I need to once again replace the upper door hinge of my shower door, the part number is 10-058, and it is SHOWER DOOR ROLLER AND BUMPER KIT

I've got one of those builder installed framed (chrome) shower doors and am in need of a replacement. I saw the 24 inch which seems like it would work but when I measure my existing door it appears to be 26 inches from edge of door near hinge side to the end of the door just before the magnet. Obv ... (cont.)

Basically, I am looking to replace the rubber (round top) shower door bottom sweep piece that slides into the shower rail attached to my swinging shower door. Does that make sense? The problem is my shower door is extra-wide as I believe it was built to be wheelchair-accessible. Most sweep replaceme ... (cont.)

Wanted to see if you can match what I have , I can not find this anywhere ... Please call me. The clip in picture has one screw and a hole in the glass to screw the two together and the clip to glide on the frame which as you can see is broke . the bottom of my glass don't have rollers like the 10 ... (cont.)

Trying to find the rubber replacement parts as described above. Thank you.

hi is it possible to just buy the top rollers ?

I need to replace sweep on my shower, I need help identifying the manufacturer. I'm not sure if the sweep slides out or if I have to replace the drip rail also. It does not screw on.

I need to find a replacement for my shower door sweep. The tee part is one fourth of an inch. The sweep is three fourths inch wide. I have been unable to locate a replacement for it. Hope you can help.

I am looking for a replacement sweep for my shower door as the original is no longer being made. My shower door is slightly curved. Is this material able to bend slightly? or is it a hard plastic. Thank you

Does the back of the sweep have an adhesive so it will stick to the shower door as well as the two screws to keep it on? My old one did and that is reason for question.

Hi, we are looking for exactly this product type, but the gap between our frameless shower door and the tile is 11/16". This allows water to pass under the door with a standard shower seal. Do you carry this product with a longer drip rail, or longer bottom wipes? Alternatively, would you recommend ... (cont.)

Door sweep split. 2003 Coastal product. 21" long by 13/16" d by 1/8" top bead .I tried 1 on Amazon but it keeps slipping out.Do you have any thing similar?

Does this include one pair of the rollers or one individual of each? the shower door we are fixing has two on top and two on bottom.

Unable to up load pictures from my Computer you will have to go with has been provided. I can only go with a verbal description its 23.5 " long and it attaches to the bottom of a Aluminum framed glass door. The area of attachment on the door the aluminum part is 1.8' in width. The width is 1' wide ... (cont.)

The pic is of the now exposed cam mechanism. Door is 1". Diam of hole is 1 1/2". distance from door edge to hole edge is 1 3/4". What is manufacturer/what do we need? Thanks so much!!

I need to replace the rubber sweep at shower door bottom. Issue is one of the screw is not tightening in the hole. Screw seems to be ok. I think the hole might have worn out threads. Need parts and help to fix this door sweep.

Hello, I have a shower door with the following dimensions L x W x H: 26-3/8" x 1-1/2 x 77-1/2. You have a product that is very close to what I need it is 10-325. The length of the one that you offer is not long enough. The one that you offer is 1". I need one that is 3" long. If you have some ... (cont.)