Viewing all customer Discussions for:

Other

Hi: I need to replace the hinge on a window that I can't open until ready to repair because it will not close again due to broken hinge. Attached is a picture of the hinge on another window except the broken hinge opens the other way (opens on left side of window and swings to the right). The rai ... (cont.)

Hi, I'm looking for three replacement opening mechanisms for three different Gorell Windows. The first two are the file: 20210708_161621. I need a left hand, and right hand one of these mechanisms. The third is the file 20210708_161818. I need just one of these, with the handle on the Right side ... (cont.)

Hi. Can you tell me when this door was made? See photo below. Thanks

I am looking for slot latches for vinyl windows mfg. around 2000. They don't require any screws to attach to window. They slide into slots.

Thank you

My patio door is an old one. I'm guessing from the 1960s. The screw spacing is 3 inches OC and the latch is surface mounted not in the door itself. I couldn't find any brand or numbers.

Hi, I have attached 3 pics of a lock shoe that I need. Its an 1 ¼" wide by 2" long with a thickness of 3/8" I can only locate ones that are a half an inch thick. Any help would be greatly appreciated. Thanks Jeffrey

I'm looking for similar parts to replace the broken ones. It's a guide for the slide bar that secures the movable window to the frame.

Size of steel roller is 1.5". Size of roller is 2.5" long, 1.5" tall and 3/4" wide. There is a screw on top of the rollers that hold it in place to the bottom of the frame of the sliding glass door.

Looking to get this in other finishes if possible. I sent seperate email as well. thanks in advance.

The window balance is 27 inches.

Having a hard time trying to find this guide stop.

Need this replacement part is broken and window wants to fall. On part it just says Truth 32.

for double hinge crank is stripped

There are 3 window operators needed. Two of them from the same pair of side by side windows, one is a left hand and the other a right. But they seem to be a pair. The other is a single operator needed. Of the five photos it is the first or last depending on how they come through, but there is onl ... (cont.)

Hi, the markings say new zealand. I need to replace lock and handle. Can you help identify?

Our window channel balances measure only 17". The number shown on the piece is 164,000. Please advise as to what to order.

I need a slide spring unit for: This info was pulled from the glass. Please let me know if you need anything else. Thank you 60318072668693 WFRC-JEL-N-880 NW

need replacement

Do you have this roller for a sliding glass door. Take a look at the mounts as they go beyond the main body so it will recess in the door frame more door information series 400 SGD-R30-72x82