Viewing all customer Discussions for:

Other

29inch balances 1/2 inch with 1" foot 6 window panes are 14 pounds 2 windows are 21 pounds All the same height 2 are wider and heavyer Wing on foot broken on one side

Would like to replace these hinges with satin nickel or a non-shiney silver. We are buying new bottom cabinets but re-finishing the top cabinets and painting them a gray. The hinges are not self closing. On the hinge it says. Pat. 1967 CAN. PAT. 3.391.420 There is a B or 8. Also an A with a cir ... (cont.)

I am also looking for a storm window finger latch, which goes to the interior storm window on an aluminum insulated window

We are missing track glides for the window arms. The window does not retract without the piece.

Need to replace balance rods. Not sure which to order. 16 inches long. Thanks, victor

There is no number on the vinyl strip there is MDL 1010 on a label on one of the Alliance double hung windows. I hope that this email is bundled with the original email.

Casement window operator. I can only find "41011" stamped on the arm. Need help identifying

I have window world windows installed by a previous homeowner. I have multiple windows with broken pivot bars. They are series 201/A201 Double Hung windows. The two broken bars that I have recovered are marked with an N on one and a P on the other. The screw hole is starts at 1" into the pivot ba ... (cont.)

Trying to find this roller

I need this piece with the ball bearings. It goes in the middle of the drawer glide. Allows it to slide easily and for the drawer to not fall out.

Looking for a set of channel balances for Series 185SH window. Old balance marking 1720 Length of the metal only frame 17 7/8" long. Window sticker shows: Series 185SH P #029-109 Also need the black plastic top caps

Please let me know the proper spiral to order. Do I need to order anything other than spiral? Worrried about the bottom and how to connect to window. Thanks.

Hurd windows.

Replace missing pull. 5 1/4 "

We are trying to order this part for our dresser.

PADO handle keeps coming out and we have tried fixing numerous times. Is there a replacement that will work for this? PADO brand 7" top to bottom by 1" across Holes seem to be 6-11/16" The handle is off at the moment so pictured separately. We don't have keys to this door, so would want to replace ... (cont.)

Windows will not stay open, some appear broken. Uncertain of manufacturer

The part number on the hinge is 03030.67. I cannot find a manufacturer name or any other identification. The attachment screws are spaced 2" apart as shown in the picture.

I,also, have Adar brackets. The glide seems fine, but the bracket has come loose in 2 instances. In 1, I will try using anchors to hold the bracket in the old hole. I the other, I think the glide will keep coming out of the bracket, as the guide seems to have broken off.

I am looking for a 60 inch track to replace one that is bent. Want to confirm that p/n 23-455 is the part I need. Thanks