Viewing all customer Discussions for:

Other

Wondering what's the closest kerf mount strip.

I am looking for this weather stripping to repair our windows.

looking for the "L" shaped piece (right side if pic) that covers the hole when the crank assembly is removed. (Left side of pic) If it comes in white so i dont have to paint even better. I need 4 pieces. Thanks!

Hello, My B.F. Rich window does not stay open. I believe my right pivot shoe is broken and I am wondering if the 3rd picture does not look right. Coil looks stretched. Please let me know what the parts are and if you have them in stock. Do you have install instructions? Thanks for your assista ... (cont.)

Good afternoon I need to order 2 window 30 inch balancers for my window. The window was made by nuair 18 years ago.

Looking for the replacement.

We have a broken truth brand part# on thumb handle lock is 45082

Hi, I need 2 channel balances, I'm not sure about which shoe measurement I need. Channel is 1/2" (9/16") wide, 23" long stamped "2220". Photos attached. - Regards, Bruce

LOOKING FOR A ROTO OPERATOR, BASE MEASURES 5 3/4 X 3/4 WITH 13" ARM. I HAVE SOME PICTURES IF THEY WOULD HELP TO IDENTIFY, JUST NEED AN EMAIL ADDRESS TO SEND TO.

I need to replace a sliding door handle as well as the part that the door handle locks to, but I need to match existing drill holes in the door. The drill holes are 5" apart, with a lock hole between the two, 2.5" from each. I will also need the piece that the handle clicks into. Can somebody co ... (cont.)

Reading on the kitchen cabinet hinges reads: Blum 1 3/8. 110 Thank you! Enclosed is the picture

Hi. I'm looking for 10 pieces for a Marvin casemaster casement window.It is a snubber that is screwed onto the side of the sash and interlocks with a matching part screwed to the frame.It was Marvin's #10899110, but they no longer carry that part.There is nothing imprinted on the part itself.Kind r ... (cont.)

This seal is approximately 5/16 and the T is 3/16, do you have anything or point me in the right direction

I have several of the Ellison 500 vinyl replacement windows. They were purchased in 1998. In several of them the plastic part that connects spring system to window have deteriorated to the point where it no longer securely holds the spiral metal rod that forms part if the spring system. The seller, ... (cont.)

The upper lach on this door is missing we need the correct one to repair the door

my window balance are no good anymore don't even think about holding the window up or snug in place. so need to replace them 2 per window, 4 windows.probably should replace clips also if I can figure out how to take them out.I have added photos hopefully that helps narrow down what I need. also the ... (cont.)

Need replacement springs and the part that holds the mortice lock in place. Thank you.

This piece, sort of like a wedge that secures the non sliding side of the door to the door jam with a screw.

I have 30 JADO locks similar to this purchased 35 years ago. several have failed and I have been unable to find replacement parts. Can you help?

No manufacturer name brand. 29" Long form End to end, Round tubing with spring inside.