Viewing all customer Discussions for:

Other

Greetings. I need a replacement lock for a Milgard sliding glass door. Attached is the serial number and a picture of the lock.

Have a variety of Alenco window sizes in a home we just moved into. The main type I am looking for is close to your S390 with 15-001 at bottom and a 19-002 at the top. The difference is that the 19-002 at the top is right in dimension, but mine has wings. All other units with wings you have are ... (cont.)

I live in Florida, do you deliver?

Do you have this replacement roller

Hello, I am not sure what the series # to get for replacement channel balance that is 24" long and 1/2" wide (9/16" measured). The stamped on the balance is 86 23-3 1B5 CMC 61. The window sticker is Code: ALS, Rating: H-LC25, Series: 580, MST: 12060. Warranty info: 143-387950, PO: 6517, 02/02/ ... (cont.)

Steel wheels 1 1/8" dia housing is 3/4" thick and 1-1/8"H, 3-1/8" W has a V stamped on one side and nothing any where else in lettering

These are from one of my windows and they are 40 years old and getting creaky. What would the replacement be?

I previously bought 2 spiral balances but unfortunally didint fit in the window channel. A bit thicker. The existing ones are plastic sield or cover ant thinner than the ones I bought before.. the lenght tip to tip is31" and the body part is 30" at the bottom the tip is yellow instead of red like t ... (cont.)

Hi we just moved into our house and this kitchen window is broken and missing some pieces it seems. Do you think you could help us identify which parts we need to buy? Looks like maybe the whole operator needs to be replaced ? Thanks so much

ceter of mounting holes is about 11" / the top locking latch is stuck in lock position

Trying to find replacement

Hello, I'm not smart enough to add a photo. I need tie bar guides for 20 year old crestline crank out windows. The sku # is 400-0204. Thanks for help.

I am looking for these replacement window lock covers for my windows - i would need 10. Can you help?

I know it's 23 inch long. The depth of the channel is 5/8 and the width on the backside of the metal channel is 9/16.

This is a 25 yr old PGT French door. I need 6 ft of new weatherstripping. I appreciate any help you can provide.

It has the markings: 33 4 fv cmc 7 it measures 1/2 inch in width and 44 in length.

Bottom door sweep needs replacing. Current is original with an install date of 1999. Need in both 32 and 36 width. The door is two inches thick and the pieces that fit into the door are approximately 1 3/8 inches apart.

I am looking for simonton casement window weather seal, I will include pics of the old seal and the window information

This plastic piece's hole is broken. Also attached picture how it supposed to look in the window track

Need this part for 2 windows