Viewing all customer Discussions for:

Other

Will this fit, i believe a pancanna window

How to determine which Balance to buy BEFORE taking the window apart? My window is Double Hung, Approximately 36" X 35" (inner dimension)

There are no numbers on pivot or window. Dimensions and look match 15-177 but but closer to 1-1/4 tall. Also, can I change by removing the springs?

The pivot I have is not pictured in your gallery of pivots. It is L-shaped with 2 screws above the L bend. It is for the upper sash of the double hung.window. I was unable to locate a brand name or part numbers for the window on the panes or anywhere else.

Hi - The grey rubber/vinyl part of sweep on 21 inch door has split & disintegrated. The channel it set in looks T-shaped but is on side not bottom of frame. See photo of detached frame, channel is on left but bottom is where my thumb is, which means that the gasket would have to curve around. ... (cont.)

Need 25 replacements please. Don't see on web site

I can't remove the door by myself. Can you send someone to help me with the process, and also to identify the right rollers for the door?

Please let me know if you can help me.

I am looking for replacement top sash guides for my single hung window. Thanks

HiThis door may be 20 yrs old. It's a Cole Sewell door. Probably a pretty high end door at its time. I want to know if you recognize the hardware and if it's still available. If not, is there a direct fit replacement. Thank YouRalph

No numbers on hardware but the door glass has the name Guardian on it. My measurements are 5/8 wide X 3 1/8 Long X 1 1/4 height.

Hi, I need to replace a broken balancer for my Milgard non-tilt window. I've attached a few photos because I ordered balancers in the past and they don't seem to work. Photos 5119 and 5220 show the fittings I need at the bottom and top respectively. Photos 5222 and 5223 show the original (bottom) ... (cont.)

Replacement for a sliding kitchen drawer rear mount. Cabinets are believed to be manufactured by Gras and are over 25 years old.

Hello- I am leasing an office and am in need of balances for 2 windows. I am looking for 1/2 inch. I viewed my options online however bam not sure which one is the correct one. I appreciate your assistance. Thank you,Cherie

I am trying to identify a part in my window. The Sash balance is not staying within the window as it is lifted. It is staying up on top of the window. The window falls down and will stay up. The Sash balance looks in good shape, but on the actual window itself, I believe that the cap is the prob ... (cont.)

I need to replace both of these window operators as in pictures posted. They both have the word "Truth" engraved on the parts. Both operators are for left side crank windows. The long arm on both measures 9-1/2" in length. I am looking to purchase one of each. I do not need any additional parts as i ... (cont.)

DO YOU HAVE THIS WEATHER STRIPPING ?

Hi, need some help looking for a replacement part for a casement window crank. Please see the pictures below to see that the internal screw has been stripped. Unfortunately I do not know the brand of the crank.

I need to replace several broken drawer handle pulls on this 15 year old Thomasville bedroom set. Thank you!

I need a roller for this screen door. This is the only numbers we can find not sure if this info will help