Viewing all customer Discussions for:

Other

Only Number on the material says 3330 it's seems to be 1/2 channel balance but not sure of series. Need to know series so i can purchase.

Can't find this sliding glass assembly from a Champion sliding glass door

Want to replace 3/8 x 24 balances with black tips. I can't find them on your site!

You can see numbers on arms I believe they are Caldor windows

Please leave me know if you need additional photos

The balance, marked 2920, fell apart at window opening. I'd like to replace both on same window. It is 30 inches long, metal to metal. The other part, the plastic one in photo, attaches to side of window, movement window section, with one screw. I will need that part also.

I need to find a replacement

I am looking for a replacement hardware for my patio door. I don't see any markings on the brand but on the inside of the exterior pull it does say FPL Door Lock and then two letters I can't make out and the number 19. Can you help identify the part.

I have a Alside double hung window brokespring/shoe set but I don't know if I got theh last one from you. The pivot metal has broken. Weight 18 lbs. One original spring has '6K' stamped on the metal. Thanks.

Looking to replace the full crank mechanism - when removing the handle the whole internal mechanism comes with it so window no longer operates (will open but not close).

Ply gem double hung - need correct part number

the picture above shows a curved handle that pulls down to lock the latch of a sliding window and the handle has broken off. Would like to purchase a replacement latch

I have kv windows they have both these pivot stop balance. Can you guys help with the right parts. Thank you

I need to replace one of my drawer rails. Etching says unigrass 6600. Not sure if I need 22" or 22.5. How do I tell? I bought a different band at 22" and it was too short.

I have two noncom in windows that have metal surrounds and apparently spiral balancer. That may be faulty. Each window measures 22" x 46". They are none tilt windows.

I do not have any pictures of them installed because I have 5 windows and they all have fallen out. They are series 1500 single hung. The best I can read of the markings on the item are 26-3 CK 5 CMC 6. They are all faded. The metal part of the item is 27 inches. Is the 27" Series 385 Channel Bal ... (cont.)

are there replacements for this type of window?

Only need the side without the lock. The measurement is exactly 3 and 15/16 between the two holes. Please confirm the part number to order and need the two screw sets. Black color please.Thanks,Dave

Need help replacing this part

I need all 4 coil balance assemblies and related components replaced, along with the pivot retainers that are broken.