Viewing all customer Discussions for:

Other

Trying to replace the sliding door handle. The handle is actually ok but the bracket that attaches to the handle and the door needs to be replaced. One of the 2 mounting nipples broke. The part is dr05 1510. The 2 screws are five inches apart. Not sure if the part is sold separately or if it ... (cont.)

Good morning, I need assistance identifying a Grant roller. The marking has GRANT PAT. NO. 2783493

Hi, bought other stuff from u and worked great. This window little unsure about. Moveable window part is about 34" W x 24" H. Has the markings "2320" on the balances. Looks like attached at top, maybe a Keller window but not sure. I am in Florida, lots of different Keller windows. ... (cont.)

Looking for a replacement handle set & lock mechanism for a Papaiz storm door. The handle set is straight.

we are looking for a dozen minimally please let us know if you can be of any help

10-327 col28 1/2. SWISCO38528-011I am trying to help my neighbor who gave me limited information about the part he wants. After further investigation I learned that he needs the bottom seal or blade for his shower door. photo attached. The old/original seal became hard, brittle and is broken abou ... (cont.)

I was looking for a new lock for my screen door, it never had any. I've attached pics that show where it would go and the sides of the wall. thanks again

I am looking for an inside replacement handle (or an entire inside and outside replacement kit) and a replacement screen door. Please let me know what other information I can provide. Thanks - BC

I need window sash guide as shown. What product is the right one?

No markings of manufacturer

need enough weather stripping for 10 windows

I need a door lock for this slider. I took a picture of these label off the door

I need to purchase a 6' section of the small stainless steel sill track cover to snap on to the exisiting track. The existing track is 3/16". Will the 80-102 fit securely? The dimension shows 1/4". Thanks, Mike

Is this a pivot lock shoe, the white and blue plastic piece with the metal insert? It's approx 1" wide and 3/8" thick. Don't have a length bc the pc I took out is broken. Do you sell a similar replacement part?

I ordered 2 sets of rear drawer track socket #32-012. My handyman installed the first set and all went well for a couple months then left bracket broke. I installed new bracket and today the left side broke again. They are the same brackets that were in my drawer for 27 years. I even rotated drawers ... (cont.)

I need channel balances for the window next to this one. It is a foreclosure property and there were no balances in one window. The property was built in 1985 and it is a Weathershield 35x28 wood window. No tilt.

we have Traco windows and we need the window frame felt but dont know the exact size the pile could be 3/16"

I would like to exchange for brass nickel hardware please help.

Does anyone know where to find this window bead? Or something that will work..

I think this is what I need. Ours are so old and broke it is hard to see and measure. The one with the red ruler shows the entire width of the plastic and the other one is just the part that slides in the groove on the window.