Viewing all customer Discussions for:

Other

it is located on top of slidecloset door. the pastic part broke in half

#45010 Truth on back of lock. I need a replacement part

This glide is approx. 19 in length and 1/1/2 wide at the front. Any help would be appreciated.

Across the numbers bar it is 2 3/4 inches, the down piece is 1 1/2 long with one screw hole at the 5/8 inch mark, it appears to be 3/16 of on inch thick. I am looking for 4 pivot pins.

This is 32 inches long (not including the clips). Its 9/16 wide and the channel is 5/8 deep. It says 31 D on it. Its totally missing the spring, so I dont know anything else from here. Please help point me to the right part, thank you!

Hello I used your video to lift the window frame and I?m ready to install new hardware operator. Can you please identify the replacement assembly for the attached picture. Thanks Ray

Looking for a new Door handle/lock for an old EMCO Storm Door. Also looking for the Flat Spline to replace screen. Thanks, Jorge

Do you have balances for Homecraft 8100. Part number: 8011020. Instructions?

Can you identify this window balance it has a clip with a spring system attached to it.

One photo is the intact plastic tensioner that the spring connect to. The other photo is the broken part on the opposite side of the window. Can you help me identify and purchase the broken part? Thank you

Good morning. I'm replacing the window glass in an old (1970's) aluminum garage window because both glass panes were cracked. I discovered that the panes appeared to be partially secured by a plastic molding. I also discovered evidence of some kind of sealer or caulk. Most of the plastic molding was ... (cont.)

3/4 wide, set screw inserts from inside of roller housing. 1' +- wheels

This is what came out of my friends window and although what I see on your sight is very similar, nothing is exact and I don't want to order the wrong thing. The stamp read 2601 and the part measures 26"x9/16"x9/16".

I have a slider door and need the tumbler and keys and also the lock mechanism. Its the one on top left of the attached picture. Thanks Lee

The clips are 2 1/4" long. They are plastic. Do you have these?

Need 2

Our sliding door ha sleep lever broke ! The color is tan , I saw similar lever 82-107 in white , I was wondering if you have this part in tan color

I have a customer with four windows with the same trouble issue. After opening of the bottom sash the top sash falls open. I have determined that there are dislocated balance cords on one or more of the sashes. Do you have a video which explains the removal of the sashes, Jab liners, removal of the ... (cont.)

Glass size 33" wide x24 1/2" high

These are located 4 corners of sliding windows Tab pulls up to get window out of track There is a screw that holds it on window located under window for bottom ones and on top for top ones