Viewing all customer Discussions for:

Other

Do you have a direct replacement for this item?

Hello! These clips secure the aluminum frame insert to the frame of the window itself. They slide over the end of the aluminum insert frame, the flange (which is broken in the pic) snaps into the edge of the window frame to hold the insert in place. Hopefully this makes sense. Do you carry thes ... (cont.)

Older double hung windows are difficult to open AND close. SPIRAL: 22" × 5/8" balances. Blue Dot.

What other information do you need to help me with replacements?

27 5 b81 tl 15 2 861 rk

One channel balance needed. the stamped numbers on the back reads "329", "BLI" and "34", all seperated by space in between. Metal to metal is 33". The depth and width of the metal channel is 5/8 by 5/8 (I could be a little off). Bottom end has a winged piece. Top end piece has no wings. Please advis ... (cont.)

Hi, I just want to know what model is compatible replacement for this 31" non tilt window balance?

need replacement for 4 windows of 1-2 inch top and bottom strips. Chipped by hail storm

Drawer socket On rail it says 32134 The track is about 1.1/4" wide and 1/2" high I need the socket and the drawer guide.

I need to sashes for my Anderson windows in my bathroom. Are you able to please find the part number. Thank you

Trying to find roller P.N. 10SWH-002

1160043 stamped on one side 11600-17 and F57 9#27 4 87 on the other

This is the original latch is from a sliding glass door installed by the builder approximately 7 years ago. What is the replacement part for it?

Hi, The directions that came with the roller assembly are pretty vague. What should the finished product look like when this part is correctly installed? Thank you.

House built in 1992

E28 9#27 8-85 Thanks

I am trying to repair my tilt double hung windows 200 series. The pivot for the balancers do not show on the list of parts in the catalog. Can you help me.

Need tilt latch for traco Window, number on window is TRA-6-83

Windows say apco. Sash is around 18lb. Metal tube is around 34?, outer plastic is 35?. Fully extended its 68? from screw hole to pin. Outer plastic tube is 9/16? dia

My door handle needs to be replaced.