Viewing all customer Discussions for:

Other

I need help finding two trims. The smaller one looks like 55-192 but you tell me The small one measures 5/8? x 5/16? The big one measures 1 1/2? x 3/8? Thanks LT

Hoping you have something that will work, to replace these window locks. Please let me know. Sonia

Hello, I'm trying to fix several bottom sashes with broken/absent pins in my apartment and I need to identify the pins in order to replace them. I took picture of the working sash with pins intact to give you an idea. I strongly believe it is your 26-125 pivot bar, but I would love to have your a ... (cont.)

It?s the bottom of the spiral balance

There are no words or numbers visible on the windows, but there is a symbol on the window lock that looks like a globe or world map (see last picture). Please see attached pictures. Thanks, Bob L.

I'm needing to replace two window balances. They are 1/2" channel balances stamped with "BSI 20 9". Looking for the correct part number, size, etc. Thanks

I have lift a pull or push to open and close the sliding door. Which roller assembly do I need.

The doors are a Minex ANSI 287.1 1975 SAAC-Y8LY IV/77. That is as close to reading the window as I can get. Could you help me with which rollers that I would need with that information? Thank you very much. Tom

Hi, looking for replacement balances for the windoor series 1072. the dimensions are 42x63 single hung window. The springs are in a tube. would appreciate the help. thankyou

looking to replace 8 window balances. PGT brand marking on original balance reads 23 9 DU CMC 2

I need to replace window retainer and was wondering if you have a part that might be a good fit, I attached the serial number hoping it will help

I have a broken spring in a sash support coil balance. The housing looks like a 15-087 and the spring looks like a S180. The housing has the number 5 printed on it; does this mean the spring is a 5 lb spring? (pictures attached) Thank you for your time.

Hi, my name is Doreen, I would like to know if you carry Balance call number #34 window the window size L 531/8 X383/8 AND THE LENGTH OF THE BALANCE 241/2 AND AND WINDOW # 33 BALANCE 19 Window size 531/8 x38 3/5

I need to replace several drawer guides on a dresser. What p/n matches patent # 2857233B?

I have a sliding door that has a flat wheel. V~groove nylon. With a bearing. The dimensions are OD= .810? Width= .320? Bearing id= .260? Need 4 each Thanks Don

I have a single sash tile Patriot window that has a sash support with a single thin cord that run for the flat metal balance to the top of the window. The cord now has no tension and I do not see any part number on the metal balance. Any idea what model number it is? I don't have a smart phone so I ... (cont.)

trying to replace cabinet hinges, U.S. Pat#3.391.420. On the door side there is a very slight "S: angle.

Hi. I am looking for at least two metal clips that allow the removal of the lower window pane for Milgard windows. Marking is H-LC30 48x78 Series 6210/6230/6230J/6270 Photos attached. Thanks!

the channel has markings of 20.5 KC CMC 4 There is a single string going from the block on the bottom going to a rectangle box on the top. THe bottom sash swings out for cleaning and the height of the window from top to bottom is 45 1/2 inches

it appears to be a truth 45251 left hand window crank