Viewing all customer Discussions for:

Other

3 15/16 hole spacing. As noted in the photos, I need the latch to be about 2" down (or up) from the attachment screw holes.

13 3 Caldwell IM

Hello , Looking for a pr of replacement string balances for an older Anderson window (2003) i beleive series 200

Hello, I'm pretty sure I found the right channel guide(s) (22" Series 390 Channel Balance, 2140 strength) but am having a hard time identifying the sash guide. I don't have great measurements as I had to put the window with the remaining sash guide back in but I believe it's 1 3/8" tall. Thanks! ... (cont.)

Please advise the part and guide to replace for bottom part of glass sliding door at your earliest convenience! Label says "20121".

The hardware pictured above needs to be replaced from both sides of the same window. The only identifying markings I can see is that the coil has a "7" on it and the two plastic pieces have a "G" on one side and a "A" on the other. The sash itself appears to be approx 23" tall. It's a standard vinyl ... (cont.)

Hello Could you help me find these parts? These plastic parts have broken off my vinyl sash windows. They control the sash guides that pop out of the top part of the window to keep the window in place. Probably not using the right terminology here. Please advise thank you!

Any idea what I need to replace this lock?

Here is what I need: PPG Herculite KTrempe TemperedCAN/CGSB-12.1MBS 6206-1981-A15CFR1201 CHANSI Z-97.1-1984 I/8USGCC-1605

Looking for replacement sliding screen door handles

Hi, I'm trying to identify the appropriate size weather stripping needed for Weather Shield windows. Window identification is provided in the photo. I need tan tubular weatherstripping that is 1/4" at base and 1/4" tube diameter.

Can you tell me if you have the parts for the patio door handle?

Hello, I am looking to replace two door handles. Is this something you can help with?

Another company told me my version is discontinued Do you have anything like this? Thank you.

Do I purchase a Mortise lock for a vertical keyway to replace the lock in the photo?

Only markings appear to be the 17-4 on one side of channel. Unsure as to the specific product due to top and shoe variations. Any help would be appreciated.

Looking for Coil Bance parts shown in photo due to broken spring (and worn parts).

on the hinge it says: US - Patent 6 360 401

I unfortunately don't have all the information you generally seek. But I have an older Pella doorwall. I was unable to find any numbers or markings. My rough meausrements of the roller indicates a length of approximately 2.75", a height of 1.75" and a width (excluding the flanges) of roughly 0.5 ... (cont.)

It would have been great if this part actually came with the screws to install it. Saving 50c has created quite a headache for me, along with a trip to the hardware store. Bought the wrong ones I guess, because #10 32 TPI 5/8in machine screws aren't doing it. Will you please advise what I should b ... (cont.)