Viewing all customer Discussions for:

Other

This is a window latch. no manufacture on window. Marking on the back A-S in a square and the numbers 96,97 in a circle.

The brand name is Hallmark.My problem is the bottom shoe is 15/16 I can't find it anywhere here in Tucson. See pictures above.

I would like help with replacing the pictured crank handle with a smaller profile T-handle ( I need 3) so vertical blinds don't stack on top of current crank handle when lowered. I don't know spline size. Also, the sleeve that goes behind the locking latch, several windows are missing these. ... (cont.)

Good Morning, I have a Jeld-Wen kitchen window that opens to the outside. To lock it there was a Construction Handle and it broke. It came that way when we both the house. The sticker on the window is JEL-N-805 C1 Clad Casement. The information on the handle (looks like a fork) is Construct ... (cont.)

Window balancer is marked as follows: 21 4 JV CMC 7

I need the 795 Balance that is 26" but what is the difference between in the 26A through 26E?

Hi, I'm working on some older wood, tilting doublehungs. The balance system is vinyl sash liners with foam backing clipped to the wood frame. A metal bar at the top of the sash liner supports a pulley. The balances are naked springs that are clipped to the sash liner down low. They have a cord that ... (cont.)

Need a replacement door handle for this screen door. Would like it in an Oil Rubber Bronze finish. Available?

Storm door #3049694752 lock is broken need replacement its white

I have scheirich cabinets and need new parts. Lazy Susan lsb36 and lsb33 which is the roller and cam plate and the round roller disc on drawer glides. Need to know if can be purchase to replaced? Thank you Carol

Need two Milgard Channel Balances. They are stamped "20 4 JP Caldwell". They are 21" long by 1/2" wide. Thanks, George

I just ordered 4 Peachtree Patio Door Roller Assembly Product Code: 81-112. They will be installed in doors at Ocean City MD so they will be subject to a slight bit of salt air. What form of lubrication should I use before installing these. Oil, silicone, white lithium grease, something else? ... (cont.)

Do you know what I would need? Please look at the photos.

trying to locate replace balance for window the one I removed is 25 inches from metal frame to frame and 1/2 in wide channel.

I need help replacing warped snap bead for 6 vinyl picture windows. I think I'm looking for Ply-Gem snap bead 7323-2497 700 Pic for 1" OA, (if possible white interior and dark bronze exterior.) If not all Dark Bronze.

The screw is key to holding glass in place. Don't know where to turn. It is standard door on a track. The house was built around 1986, and it has a name plate by the front door in the cement, HOMESTEAD. The development is called the Pointe in Glen Cove.

Hi, I have a wooden center monorail guide drawer slide that needs to be replaced. The unit is: - 16 1/2" in length - width at the ears 1 1/8" - width at the neck is about 7/16" - height at each end 13/16" stepping up to 3/4" through the center portion (I could make either height work. - There is als ... (cont.)

i have a door handle that is dark brown in color with the following numbers nw1720-1, -2, -3, -4. What handle will work? thanks.

I have a patio door by Traco and need a new handle/lock set. The numbers I found are: Traco AnsiZ97.11984 16 CFR 1201 II sgCC-1308 1/8 Any idea what handle I should order?

I have a milguard window balancer that broke. It measures 27 inches in length (metal piece only) and the width is closer to 5/8 inches. The markings on the metal is stamped 26 4 JV CMC 7. It looks like S380, S385, or S395 may be the correct replacement part. Please feel free to provide advice ... (cont.)