Viewing all customer Discussions for:

Other

small rollers for top and bottom of screen door with pull pins on screen frams

Having trouble finding the lock for our sliding glass doors.I went to 2 local lowes and 3 home depots and no one carries it.

Is this a parifin based product like Door Ease and can it be used for the same purposes?

Please let me know if your company has this screw available.

See attached Files

I'm looking for 4 green tip series 600 21" 5/8 spiral balance and 4 balance boots. Thank you!

Does the bottom of plastic holder "hook" on to the bottom of the fireplace mantel? The bottom looks like it's hanging freely in the air which I want, but I want to be sure before I order.

Will these work on a 4 inch thick wood mantel?

Here are two pictures of the top idler pin and the bottom outboard recessed caster i found the caster on your web site but can not find the top pin do you sell this part or have a kit with both bottom and top in it the door is a Kawneer slider thanks

Greetings. I am looking for a part the same size and shape as your part # 70-114. The difference is the screw end has a 1/2" barrel extension that secures a glass panel to the security door frame. Thanks for your help. Marcia

After going over the information on your site , I believe I have identified the balance that most closely matches the one I need to replace The pulley cord broke). However before ordering this item , I wanted confirmation that it was the proper one- it looks like a 385 series but I don't want to mak ... (cont.)

The balance is 28" long and 3/8 diameter The plastic pivot shoe is 7/8 wide and 1/2inch thick and inside diameter is 3/4 inch I have five vinyl clad windows and need 5 sets. One lumber supply company thinks these are Croft windows. The track home was build in 2003.

Do you have the interior and exterior door handle for this type of lock/latch? Mike

We have Patriot tilt windows. top window stationary. They are about 18 years old. We live in an adult community in Lakewood, N.J. and we all have the same windows.I have successfully replaced several pivot shoes but I find it very difficult to attach the metal twisted rod to the shoe with pliers. I ... (cont.)

This is off a 24 year old non-tilting window sash. It is made of aluminum and measures 1-5/8" from top to bottom. It measures 1/2" from the outside of the longest side to the end of the cross piece. (The lower cross of the letter "F" as seen from the side.) Manufacturer is unknown. ... (cont.)

Crank is stripped & slips while cranking & won't shut window Please confirm the replacement I will need to purchase.

we need 18 2830-370 series balancers do you know part # thx karen

From a Metal Industries replacement window

Hi, these were on Malta windows from 1998 and we need to replace the sash and the crank. Do you have a part that will work? Thanks, Jacque L, REALTOR REMAX Checkmate

It's the handle that goes to the sliding glass door I can give you a specific number if you need it. Just tell me what you need