Viewing all customer Discussions for:

Other

I have a fairly big doubled glazed aluminium door. If I installed two closures would it work,or do you have a heavy duty model.

FromHarcar window. Markings are; . 9d v

Tilt windows, broken handle need some replacements. Don't know manufacturer but installed in mid8o's

Thanks for your expert guidence and the useful posts. My house is 25 yrs old and parts change. When I read of a nearby homeowner needing the same outdated part( K 295) I was happy to see your experts had already found the replacement and the smaller parts to service my windows. I double checked my m ... (cont.)

need a new inside door handle

Looking for the part that caps the rail of the sash that the Non-Tilt Block and tackle balance butts into. I don't know the manufacturer of the window

This is one of three clips that hold the fixed door in place. Do you carry these or know where I can find one?

Looks to be 631C stamped on the balance. What part replaces this as both balances are broken?

I have ordered two 26-125 sash pivot bars and need replacement balance springs. I am replacing 35 inch "vinyl" tubes approx 5/8" diameter. Window sashes approx 35" tall by 33" wide, approx 20-25 lbs. No colors on current spring assemblies. Unsure what series to order

Dave I need 3/4 inch white self tapping screws for windows. The small ones. 200 screws. I think the part number is 66-062. Thanks Jim

Not sure how I can translate the stamps on my window balances to your equivalent models from the attached photos. Also, I have more than a handful of windows that are difficult to pull up and down. Balances are sometimes not going with the sashes when I pull them. Not sure what the potential caus ... (cont.)

Aloha, I'm in search of a window casement through screen

Need new door handles inside and outside with the plates. Lock is fine. PPG Herculite K. Tempered safety glass. CAN/CGSB.12.IM. 16CFR1201 CH. ANSI. Z-971 1984 ItU. SGCC 250 6023905. ...

Broken i need replacement but i didnt see serial number or name just saying made in new zealand,where i can get that handle to replace I am new owner just brought this house and handle broke down now Thank you

I wanted to know if by chance you could tell whether or not attachment 3 (taken from your site) would be a great replacement for the part shown in attachments 1 & 2? Also, if so, do you have 8 on hand that I can purchase? -Mike

I have numerous Vaughan bassett chests with a good supply of spare parts, but I need to order some of the item pictured. Do you stock it and what is the part number. Thank you

I am replacing a broken top sash guide. I plan to order the channel balancer 2830 which seems to be the best match for my window. I cannot find the top sash guide that exactly matches the original.

kitchen drawer rollers

Hi, I have MI windows. The coil spring is 1/2 inch wide. The window is double pane - 21 inches X 22 inches. Thanks Joe

the sash has the following number inscribed on it: E40 9#31 5-86 there is another number: 11600-17 Please provide needed information so that I can order replacements.