Viewing all customer Discussions for:

Other

On the swing arm there is a number 20810on the flat plate where there are two wheel type mechanisms there is a number 90 and a 31 on other side where there are screw holes. the crank arm has a number 45054 on inside of it. frustrating in that handyman took apart and trying to make sense of pieces. ... (cont.)

Hello I thought I woudl reach out to see if you all have somethign that might work for this window vent stop that we broke. Steven

Need new rollers, whole assembly or just the rollers if that's all that's available. Possibly Phillips brand 6' door in a 1997 park model trailer

Need to replace both sash balances on my older Andersen window. Got them out and they are stamped as follows: 09 5 23 4 71. Those are the only markings on them. You list a product code 24-531 as a replacement for a number of sash balances, including those marked "523." Mine have the "523" in th ... (cont.)

What is the measurement of how far out the handle is from face of door. I am looking for a replacement handle with minimum width (how far it sticks out from the door)

#5 written on broken coil

I'm looking for a replacement part for this sliding door

I need both sides Top plastic part broke on one. 14" metal 1/2 " channel 1340 stamp Built about 1987

How do I replace this door handle with lock

I need to find a replacement for this spiral spring window balancer. Looks older and has a metal clip on the end that attaches to the window itself

I believe it's a pivot shoe. Sun window from the 90s. The coil spring is 3/8 diameter. Looking for a replacement part number

Building was built in 2003 or so. See attached photos.

Hi. I'm trying to find a replacement for a broken clip in a casement window. It is the piece that connects the arm to the window and slides along a the track at the bottom of the window. I have a Simonton casement window, and the part is a small black plastic square with a circular hole where the ar ... (cont.)

27 3 GP Caldwell about 29" long including the plastic ends.

I need a new Anderson window tilt latch

Looking for this window crank assy replacement, I need two right hand and two left hand

Good morning, I would like to know if you have a replacement for this roller guide as I'm pretty sure it's discontinued. One roller became unscrewed from one door and both rollers from the other, two of them were lost. Thank you for your assistance.

Help! The spring loaded mechanism that holds the storm windows on a number of my windows have failed. Otherwise, windows work great. I can't find any identifying marks on the windows as to brand. Do you have replacement parts? Many thanks, Gifford

The sliding glass door is in the back, glass-enclosed poarch that was built in the early to mid 1960s. The parts of the front roller have no discernible names, numbers or markings on them.

I need right and left operators 20810 for my wood casement windows