Viewing all customer Discussions for:

Other

I need to replace a window Chanel balancer. The string is broken. I have the part number from the balancer it is: 26-4 JD5 CMC- 54 Then length of the channel without the plastic end tips is 27 inches.

Hoping I can get help on which two parts i need to order. Thanks a bunch

Just looking for some help identifying this glazing bead please.

Seeking for the handle set in the images that I have provided. My handles are 9.7 in. long. The inside, with 2-rectangular holes, is 11.7 in. long

Patent no: 6.264.252

Industrial facility built circa 2005. Goes with grid ceiling panels but covers recessed fluorescent fixtures.

looking for the replacement weather stripping for my door. It has come loose and will not hold in place...It is a Pella door. The pictures show the profile of the stripping and the second is the bottom of the door (with a round mirror under and a side view of the slot. Dimension: total height 0.75 ... (cont.)

HiWe are looking for a 13 inch hinge to prop open our skylight to have access to our roof.See photoThank youDavid

I would like to purchase this part for my Pella sliding door.is this enough of a picture for you to determine what I need. It is the door edge weather strip.

Hi, Can you please help my identify the sliding patio locking door handle attached on the pictures? I purchased the door in 2006 and the handles just got broken, I would like to order a repacement but I am not sure which one will be suitable. Please kindly advise, Thank you, Klaudia ... (cont.)

Need to replace the storm door glazing bead that holds the storm door sash/glass In place. 25 years old. No marking to ID anything. Included is molding in place & partially removed with measurements.

This is a very generic replacement window at least ten years old, possibly older. The last time we cleaned it, there was a "pop" on the left side, and it quit staying open. The left one is definitely broken, and the right one seems to only have one coil connected. The hole at the top of the slide ... (cont.)

This broke over the weekend. It will allow the window to open, but will not close the window. The entire case pulled out, and is broken where the handle pushes in. Thank you so much.

Hi, I am in Japan, and one of a window in my house have been very hard to open for a while. I removed coils which were broken. They seem to be Double coil balance (Series 210 Roller-Tilt Balance). Please check some photos I attached. I am thinking if they could exchange to1/2" Coil Double Suppor ... (cont.)

Hello! Looking for a crank for a 2008 Weather Shield window. Colors an available ?? Hard to explain the color... Is that something I could possibly get from you? Thank you! Not sure if this picture is helpful at all regarding a new handle. I should mention that the whole structure is 5" lo ... (cont.)

Balance is 1/2 in width (9/16th) and 29" long. It's marked on one side with 28B USB They are non tilt windows. I'm not sure the exact weight of the window.

Need replacement

Hoping you could let me know what the replacement parts numbers would be for this photo

Looking for hinge to replace kitchen cabinet hinge. Cabinet is face frame. Original hinge attachment piece broke because the casting for that piece cracked due to casting crack. Hinge has identifying number and letters: 300 & HZ. The cast piece that broke has identifying marks: H 3 & HZ. ... (cont.)

Hi there, I bought these Alumina doors (Greek company) that use GU handles. I need to change this one, perhaps with the lock it self if necessary. Could you please tell me if you can get it... and if so, the price. Thank you. Simon