Viewing all customer Discussions for:

Other

1950 window has metal jambs that have springs that push against sash. Need new springs and the part that holds it in the jamb.

The vinyl part snaps into the exterior of window frame and into a groove in the middle of frame. The part holds and keeps the sides of the screen from being pushed back to the glass window, once it is installed. Without part, a large gap would be seen on the sides. One pic shows end view of part, ... (cont.)

Need to replace door weather-stripping. Not sure what you show as Pella Push-in Bulb Weatherseal, Product Code: 58-181 is correct. See my photo...doesn't look quite the same. ALSO, for Pella Designer Series casement windows of same vintage: Have some where the CAM in the locking mechanism is bro ... (cont.)

Hello, Need help identifying which part I should buy.

Hello! Can't identify this part. There is only one littering "3030"

Does the 82-243 stainless mortise lock include the pocket trimplate? If not, do you sell it separately? I can't find it on your website. IF so, I need 30 of the 82-243 plus 30 pocket trimplates. Please provide pricing.Our originals are from PGT. The stainless mortise lock bears the number 32439 ... (cont.)

Screens are 20 y old. Breaks a lot. Dimensions on the pict Thanks

I am looking for I guess its called sliding vinyl window glazing bead. These windows are in MN and I am fixing up all the windows in this townhouse from the mid 1970s. I was having a hard time getting a clear shot with the tape measure in the picture but the measurements are 1/2×1/2×1/2. The wind ... (cont.)

The black plastic part is broken I need to know what the replacement is. The last picture on the right is fine, the first one on the left is the broken one.

Good Afternoon:Can you please let me know if you handle patio sliding door track rollers like what is shown in the attached pictures? I need a set of 4.The numbers off the door are: CTG Tempered - 16CFR 1201 II SGCC 1922 5/32UAANSI Z97.1-2004Thanks for your help.Have a good day.Thank you.Hamit ... (cont.)

Probably Jelco cranks dating from the 1990's. Threaded insert (male) popped out, You can see three set screws added in an attempt to fix. (Didn't last for long.)

We have metal clad wood casement windows from Pella that were purchased approximately 35 years ago that have a small plastic piece at the top and bottom of each window to guide it along the frame as the crank opens it. Do you stock these or would you need me to send you a picture of the part sittin ... (cont.)

I'm looking for the rollers for a pacific empire 8.' Patio door. Are there any available in your warehouse?

Hello, this piece on my window broke I believe is the window tilt retractor not sure exactly. I also added a label that's on my window. It is a single coil.

I am a LANDLORD in Nashville. When a tenant recently moved in he told me a window does not lock. Upon inspection, I discovered that BOTH Keepers had been broken. I removed a complete latch from a different window. Photos attached. My local window supplier tells me that this latch is by Amesbury T ... (cont.)

Looking for replacement window locks like the one I provided in photo.

Flesher Windows went out of business a few years ago. Having a hard time finding parts.

I am looking for 4 sticks of this glazed bead.

Numbers on part: 8 60 or 09

,