Viewing all customer Discussions for:

Other

Pulled roller off of interior sliding glass conference room door. All dimensions match up with 81-052 except the where the wheels are mounted. The wheel depth is right around a 1/4" and are mounted on the upper hole where in the photo of the 81-052 the wheels are mounted on the bottom holes. ... (cont.)

Hi all. These locks are circa 1994, aluminum framed windows. hole setback is 1/2" 2 1/4" installation hole centers throw measures 3/8" number on reverse looks like 117 Thank you :)

I would like to know what crank handle pairs with 39-140 dual arm crank

Hello, I have enclosed some pictures of top sash guide from our window. Need replacement parts. The dimension are (inches) vertical height is 1 3/4 width 5/8 the portion which goes into the side of the window and not visible on the side view the thick portion on the top half is 3/8 on the si ... (cont.)

its roto casement operator and would like to know if parts code 39-092 a good part to replace the original parts as in the pictures above, thank you so much!

Need 19-5 sash milguard balance

Guardian Carleton,Michigan ansi z97.1-1984 Safety tempered Sgcc933 q/Bu 18 cfr 1201 II Can cgsb

Looking to purchase a bunch of these screen keeper clips. They ride installed in a groove parallel to screen. They are T shaped. They snap into the groove, one side of the piece that snaps in in flat, other side (screen side) has the barb to keep in groove. The clips once installed can be moved up o ... (cont.)

Can you help me choose the right replacement weatherseal. The windows are 20+ yrs old. I have 35 windows

Hi do you have these rollers for my Binnings Sliding Screen door?

Hello, I need several lengths of balances but at least 4 of the 13 2 CJ/BSI/VT. I can replace the individual parts- if they are available. I didn't see guide with a roller in the end.(?) Nor one with the clip in a 'V' shape. Do you sell the cord? Seems to be really stiff on these older units. Tha ... (cont.)

I need three white door upper wheeled roller assemblies for a semi-circular hanging shower door.

This is Charlie. I have three (3) large Crestline casement windows with three panes of glass in each. I need to replace the glass panes since the seals are broken. To do this I need to remove the vinyl glass bead that holds the window in place. These glazing beads are 40 years old and very brittle. ... (cont.)

Please let me know if this part is available

Here are some pictures of the roller assembly I am attempting to replace. I had to remove the bottom of the aluminum frame the remove assembly, it screws in from the top (glass channel). I believe the wheel is 1-1/8", not 1-1/4" like most are. It says "Ultrasonic the side of it. The glass sliding do ... (cont.)

My track is 60 inches long. And concave. I believe I need the 23-272 track and cut to size. I don't know what rollers to get. I will replace all 4 rollers. Present track put in home in 1984. Has label on it from Contractors Wadrobe. Thanks. Jim

The broken pice latched onto a rod.

Hello, I found the vinyl glaze on your site, but I'm also looking for the wide trim that goes across where you see the wood next to it in the photo I submitted. Do you carry this part and what is it called? Thank you Ross

Hello, Is the tilt window sash 26-415 a T at the end. It's hard to see from the image on-line if it protrudes from each side, or just one. Thanks!

I have Pella 150 series door im looking for the complete handle assembly with keys and lock and door strike , i have a part number for the latch strike V615276