Viewing all customer Discussions for:

Other

I measure from the top of the plastic where the rope goes it measures 25 inches , And the other measurement metal to the end of the other metal frame is 23 7/8 inches , Is the outside depth of the metal frame is 5/8 I want to know how much does it cost for individual and do you have them ... (cont.)

Hi, I'm hoping you can help me find a replacement bottom track for my sliding glass / mirror doors. Overall width of the track is 3". The raised portions on which the convex wheels roll are 1 ?" apart. I need a span of 71", 60", and 70 1/2" Thanks! Let me know if you have any questions. ... (cont.)

Pella double entrance door installed in 2007. 96 inch door Need weatherstrip at least an inch longer

I need a replacement threshold for my Anlin Sliding door. It is a Malibu XO narrow stile SGD-R15-96x96 Do you carry that part?

These are what I think to be Leigh 70's era bifolds- looking to find similar parts and tracks for identical bifolds in another room (for a 10' opening) which were completely uninstalled and are missing all hardware, including original tracks

These louvered windows/jalousie operated windows are on my daughters enclosed back porch & some won't close and seem to be broken. Is there anyway to identify what parts may need to be replaced or how to fix these?

Hold the window up so it doesn't spam down. These are windows that fold down for cleaning. Thank you

I'm looking for clip with screw that holds the screen shown in the picture. In the picture, there's one such clip on the bottom right. What is a equivalent part of this clip?

Hello, I am looking for a replacement for my sliding screen door track. It's 6 ft.

Note that the cracked glass is on thumper non movable sash

I have 8 windows that need balances. 3 of the 36"x32". 3 of the 32"x34". 2 of the 36" x 24." (These are the dimensions of the lower frame. See pics please.) They are double-hung tilt-in windows made in the late 1990s. I've attached pics of the mechanisms, parts and labels.

Hi, Could you lead me the the correct part? We did not remove the pivot from the door yet. looks like Product Code: 79-097 label on the door says arcadia Thanks!

need a replacement balance for builder quality windows 34" with the green back. These also have the round hole at the top.Thank youBill

I broke a spacers holder to the bottom left top sash. Spacer now falls out. Do you sell the spacer holders that go with this window? I may need both the holder and new spacers.Door model # 146BV 14614032.112170322 36" Larson Thank You James

Have a window (both half that comes out is 13inch high). The metal springs on both side are rusted out at bottom. I tried to capture pictures. Looks to me that there is a rusted remnant of the piece still screwed in to the bottom of the windows on each corner -I am guessing that is what hook into ... (cont.)

i am looking for a sweep go under a Larson storm door. flat on one side and half t on the other side. I have tried to get number off door. Very dim, 822A32U 111NNN926.The strip has a Half T shape on one side and and the other side is flat. gray in color. it is about 3/4 inch wide. I can send picture ... (cont.)

As you can see from the photos, I am in great need of replacing the glazing of my windows. Can you identify which one this is? It looks like Anderson or Rollyson, but I'm just not sure. Also, I recognize it might not be any of the ones you have, as these windows were installed in the late 1990's... ... (cont.)

Hi there, Looking to get an accurate part number for this coil. I was able to piece together the complete writing from a few of the same coils in my house: 5.0# 35" PAT5232208 The coil measured 3/8" wide Thank you!

22 9 30.2# 19# LT IP Caldwell

The distance between the screws on the door handle is 5 inches. There are no screws on the lock mechanism but there are screws on the plastic piece that the lock attaches to and that distance is 3.5 inches.