Viewing all customer Discussions for:

Other

I purchased 10-118 roller bearing self locking rollers, they are too narrow to fit into the U shaped channel in an old IMC medicine cabinet manufactured by Berkowitz.Do you have a wider sizes?Thank youLen

Metal portion of balance is 26.5 inches. From a Milgard window about 20 years old. Measures 47x57. Weighs 30lbs.

Can't find handle for this door. Help!

Hi, I need a few hinges to replace rusted ones on my Milgard french doors. Do you have this type, or can you get it? Thanks, Louis

During the hurricane IAN almost all my windows come open even with the shutters on all because the tilt latches were old and hot Rodger. I was thinking to change the windows but if I can buy this item for this season.

reliabilt wardrobe door bottom rollers 0219942 do you have these rollers or similar have a wheel not concave

Steel Wheel O.D. = 1-1/8" Width = 11/16" Height = 1-1/16" No markings

The base is about 2.25 across. The latch needs to have a size of a .5 inch to fit between. Any recommendations would be appreciated

looking for complete replacement kit for center mount system that uses the #32-078 drawer guide Thanks Terry

Hello I am looking to replace the operators on a twin casement the number on the arm is 40577. Please include all the part numbers that you would advise ordering to replace both operators left and right. Thanks Mike

need coil hook to fit item #01-31-1a-6-2

Do you carry this style of handle

I need to replace four sets. What's happening now is the balances are not strong enough to raise the Sashes. The windows are 35 1/2 x 37 1/2. They block and tackle balances.

Old roller assembly wheels have Killian Toronto Syracuse etched into nylon or plastic wheels.Mechanism appears to be 3" long with a 1 1/2" roller wheel. The old rollers wheels appear to be nylon or plastic as flat spot worn into both.Quite an old door, original install was around 1963 !Any help appr ... (cont.)

Not sure what part this is and unfortunately I don't have any parts information or numbers. It's for a rental property and all I have are these photos from my tenants.

Help what part is this.

Hope you got my main info. Here are the other two pics. Thanks, Marshall PS let me know if you did not get the dimensions of the channel.

Needed for securing aluminum frames for screening to porch enclosure. Bought some years ago at local hardware store and put them at the top and bottom of the frames, but need to acquire some more to put on the sides and cannot find them.

Hello! Jeld Wen told us they no longer have this type of window lock. Would you possibly have it? The house is about seven years old so it should still be around somewhere!!!

The whole part is in the first picture below. It is the cracked one on the right The one that is too large is on the left. (Originally ordered 95-230.)