Viewing all customer Discussions for:

Other

The second picture show the handle In the up right installed position. Meaning the keyed lock is on the top. The bottom handle is broken

I need double hung window lock replacements for the following windows- sticker on top sash says AMSI Series 8500 MST 3850 ANSI /AAMACan you help?

good morning: Earlier I sent you desk drawer right side rail which is good. Please see the attached pictures of the desk drawer left side rail from which the wheel broke down. The rail is 20 3/4 inch long, 1" wide tapers to 5/8 inch at the bottom, wheel is 7/8 inch diameter. I can buy the whole ra ... (cont.)

took these additional photos but aren't sure there was anything else I could take a photo of. Can you please let me know which coil balances, Tilt features and window locks I should order."

Where can I purchase bottom sash weather striping for a CertainTeed window

I am currently in the process of moving out after selling my house. Since selling the house, we have had two casement lock and bezel kits break on our Andersen Windows. I was inquiring if you have the names above part in inventory (we would need two) and if so how long will it take to receive? We ... (cont.)

HI, Looking to see if you have this strip that goes on the base and side of these windows. It is 3/4 " deep. Are these called jalousie windows? Thanks Joel

No idea on part number, manufacturer of the balance or window. It's been painted over a billion times.

good morning, I'm looking to replace the balance for a window, but I'm not sure witchy part is the correct one. the balance dims are 27" inches long and 1/2 inch wide.

I am looking to replace everything in this photo except for the brackets on the far right. The operator handle has a serial number of 25 45054. The duel operator arms has a brand name of "truth" but i cannot find a serial number. Let me know if there is additional information I can provide, thanks! ... (cont.)

I am looking for a casement handle that operates at 5lb psf.

I was wanting to replace a window tilt window balance. I included pictures, I had planned to purchase the 28 inch series 770 balance. Product code S770-28. The stamp on my broken balance says 27 but it measures 28 inches, and is 9/16 inch wide. Thanks in advance -Zac

Good morning, Any way of identifying this with out measurements?

I believe this is part# 58-042, but wanted your expert opinion. Thanks

I'm not sure what brand of door this is. I believe it is a Peachtree door. It's over 20 years old. Is there a way I could identify it?

I am looking for Lift Rail Corner Set or sometimes known as Lift Rail End Caps that fit into the lift rail of a certain type of extrusion used in fabricating vinyl windows, ...

Looking for the white cross bars for French windows. I am missing 3 - about 13" long

I couldn't find this part on the site, please help.

Dear Swisco, I need two replacement wheels for this aluminum patio door from about 1978 which has been near the ocean so is very corroded. There is a .32" gap in the top that allows a ridge in the underside of the door to hold the wheel assembly. Wheel holder assembly is 1.21" high by .75" wide by ... (cont.)

somehow the latch at the door had fallen out plus the small leverage also broke. I do have total of three sliding door with the same locks but only one is broken i would like to get a complete replacement