Viewing all customer Discussions for:

Other

Have a large home with needing this hardware in many windows, just wanted to see if you could figure out what this is.

1 3/4 Steel Roller, no Tabs 2-1/4 body length 1-5/8 Body height 13/16ish body width Not Adjustable single hole mount with side frame anchoring screw hole

I need to rapace the weather seal/strip on an older single hung window. Can you identify the weather strip needed from this picture

Hello, Trying to find window operators & Entry Gard made by "Truth" Model 31858 Please let me know if carry you the specific model or a compatable one.Both right and left operators. Thanks

Hello, I'm looking for a replacement door handle for my patio door as the handle on the door now is starting to pull apart from the locking mechanism. Frank

Need 4 longer and 4 shorter balances and boots. The current have been baked by the sun to the point of crumbling.

I would like to replace the top and bottom hinges for a heavy wood casement window sash. I think the compatible part that you carry is 36-048. A couple of questions: Are these different for left and right handed openings? Is my window in the picture left-handed? What is the correct part number? Do ... (cont.)

Looking for the little clips that go in the screen and slot into the grooves on the window casing. Its only about 3/4 of an inch or so. And it completely comes out (doesn't clip in and stay in the screen when not attached to the window) it kind of has a 16th L shape halfway thru it. ... (cont.)

Looking for a white "Smart Touch" latch for a Milgard horizontal sliding window

I am looking for a replacement part as I am able to open but not close my crank-operated window. Think I've identified the right part (product code 39-172) but wanted to check if this could be confirmed before ordering based on the attached picture. Is there a part where the top arm measures 4.5" ... (cont.)

These rollers are from a set of bypass closet doors. Nylon wheel has KILIAN embossed on one outside edge. Body is 2 1/8" long 5/8" thick, and 1" tall. Nylon wheel is 1 1/4" wide. I'm interested in both total replacements as well as wheel and axle replacements. Thanks, Dave

any idea how to source these?

Size 1 7/16" length ? 2 lips on top are 5/16" and lower piece to insert ¼"

The plastic knob latch has broken. Need a replacement door handle part. Andersen Screen Door serial # 302070762.

Looking to replace window latch

The bottom few inches of our inner door jam on one side of our Marvin sliding glass door is rotted out. We need to replace that piece as well as he weather stripping that goes with it. The door is wood on the inside and clad on the outside. We are hearing from Marvin that it would be their old di ... (cont.)

Latch side, just under 2" wide with a seal on the left inside and foam fill seal on the right thatshows on the interior when the door is closed. Off-white,

hi this is a cross-section of the push in bulb weather seal on our wooden French door. It is approximately 8 feet long and inch and a quarter wide. The door is most likely 22 years old. If you have anything that's close send me a picture thanks.

Hello, do you have this product for the CGI commercial window Extruded snap on glazing beads (in contoured ogee or contemporary square profiles)

Do you have these metal clips? Thanks!!