Viewing all customer Discussions for:

Other

We have two (2) sets of window channel balances --- both 35inch long.2 qty set stamped: 34-3 AA CMC 11 (not visible in picture)1 qty sets stamped: 34-4 DA2 CMC 4JGreening AZ - 34-3 AA CMC 11 & 34-4 DA2 CMC 4Look forward to hearing back from you to determine which parts are needed to be ordered t ... (cont.)

With regards to the corner keys, the vertical posts are smaller in width(1/8) than horizontal posts (5/32). Height of posts are the same at 3/16. The tilt keys are similar in that the vertical posts are smaller in width(1/8) than the horizontal posts(3/16). Height is again the same at 3/16. Diameter ... (cont.)

I am looking for a balancer for a 47x47 inch single hung window. Please see attached image 19 3/4 inch length and 1/2 inch width. Thank you! Adele

We are buying a house that has about a half a dozen broken casement operators. Can you help me identify this type?

Tony

I have a customer that has 30 year old Marvin all wood awning windows and his hardware has broken. Is this somethng that I can get from you?

Need to replace bottom weather stripping from jelly wen window. Number on window etched into glass is g402-01184-8703.

So I think I need your part 84-024. This is a lose part that goes with it. Sets the height of the roller in relation to the track. Do you offer this part as well?

How do I repair this part? Any suggestions or recommendations? It bent and splintered broke off as people when stepping into home have stepped on it.

Not which the right one is please help. Window not at location

Hello, our house was built in 1963. The storm windows on all 6! doors slide up and down. The white plastic pieces in the corner are breaking off of the top storm windows. The window stamps state: Guardian, Charleston, Mich. ANSI Z97-1-1984, Safety Tempered SGCC 933 I/8U, then a line and 16 CFR 120 ... (cont.)

I am looking for .. - (1) escutcheon plate (black) .. I just learned a new word ;) - (1) turn lever tail (black) Please advise if these two parts can be ordered separately from a complete set. Thanks .. Georges

Looking to buy 1 hinge. Please let me know the availability.

Hi, I am looking to buy replacement part for window wheel rollers and attached are the pictures for the width and height of the existing window wheel roller. Can you see if you have compactible parts? I would need 20 pieces. I also looking for the white fabric that goes between the two window p ... (cont.)

We are new owners and do not know who made our windows. If you do - I would like to know. Many of the rollers on the bottom of the sliding windows are stuck and worn down to "sleds." I'll dig around on your site and see what I can find. Right now I need to keep the screens from blowing out of th ... (cont.)

We have an old 1950s Era trimline sliding patio door assembly with broken wheels. Do you have any idea what part number would work to replace this piece (pictured above)? It is a 1 inch wheel that is 1/4 inch wide. Whe spring is about 1 inch long. The wire frame that holds the spring is approximatel ... (cont.)

Metal peice from bottom of window that slides into channel balance. No photo available and don't know what type of window other than contractor type.

Hi, I have a part that has broken on a number of double hung sash windows. This part catches the balance on sides of window opening and when broken, the sash falls. Can you please identify this part and provide a cost to order replacements? Thank you, Darryl

Rebuilding this set of bi-fold doors and need to ensure I have the correct parts. A Home Depot employee assisted in listing some if not all of the parts needed for the project however also wanted to check whether one of the bifold door kits would work.

Hello! I need: 4 black snap-on caps 1 handle with adaptor to screw onto operator with pin as shown in "handle pic. jpeg" 4 pins to join handles to operators. Thank you for your help!