Viewing all customer Discussions for:

Other

In the pictures you will see both Pella and Anderson wood framed windows. I am looking for the screen attachment clips that go in the slots on the sides to hold the screens in. I'm thinking it may be a swivel that attaches with a rivet into the sides of the screen.

I spoke with someone and they didn't seem to recommend what I truly needed please help

Hi, I need help finding this part it is a casement window lock latch assembly. Lock is on the left side I am unsure of the manufacturer I included a pic of the label on the window if that helps. Thanks, Keith.

We have a sunroom that was already part of the house when we acquired it in 2004. The very small rollers on the bottom of the windows have been broken over time. I've removed one of the unbroken rollers in order to photograph it (see attached). Measurements are: 3/4" long Inner track width appr ... (cont.)

hi need some replacement roto parts for casement locks on pictched roof window they are the conner pulls can you help thank you

I need 2 balances and a dozen hold down clips. I am attaching pictures. Thank you

The windows are from "Champion Window". This company told me that the windows are of industrial grade (sold to a real-estate developer) and about 20 years old. The company cannot provide the parts. The 3 type of parts I need are shown in the attached photo. For a preliminary test I need: (1) Left & ... (cont.)

Hello I'm hoping you can assist in finding a replacement lock for my window. I've attached a picture. The lock measures appropriately 3" wide

HiPlease can you assist, we need to replace a broken balancer coil and I don't know which one I need.This is for a residential property in the UKMany thanksTrace

Hi Window Balance Expert, I have problem with my bedroom window , it won't stay up. And the uploaded is the left side of the problem coil (broken) in the pivot shoes. I would appreciate if you could idenfify 1. what coil (part number) I needed based on the picture if could. 2. Do you I need t ... (cont.)

Hello. Here are the details to my balance that I need a replacement for: ? 1/2" wide ? Fitting have wings ? Bottom shoe 1" depth ? 27" channel length ? 26 4 BSL OK stamped on channel

The brass bushing failed and I need you're guidance in repairing the awning operator.

The balance is 1/2" wide and 26 4/8" long. Can I get the same parts?

Hi, I need 7/8" x 7/8" x 5/16" with a pull ring. I can do without the pull ring if necessary, but I can't seem to find this size anywhere. This part appears to be the same as Screen Corner Latch with Pull, 7/8" x 5/16" Product Code: 95-218, but I don't need the locking pin. Looking for about 50 e ... (cont.)

Hi could you identify the replacement for the pivot bar pictured in photos. It may be from Certaiteed or Simonton. has 2 numbers stamped, o3 on bottom, 11 on top; 2 holes, 2-5/8" long. The pivot housing is original, see picture (metal, slightly oval. Thanks, Don

Looking for the piece pictured that attaches to the bottom of the sash where the pivot bar protrudes. Also not sure if there's supposed to be a pivot case that goes inside the sash. Thanks again always for your assistance.

We have an older mobile home and one of the sliding closet doors has damaged roller pieces. Door is in great shape... but has to have new rollers. Can you help us choose the correct ones? One is upper. One is lower. Thanks!

I need the snap=in glazing trim for an awning window. The house was built in 1957. The originl trin is aluminum. Do you have anything that I can use? I have attached pictures of the trim from 4 sides. I wwould need approximately 9 feet.....

I have 2 casement windows that I need to replace the hardware as the gear mechanisms have failed and they do not crank open or closed.

I'm looking to replace the hardware and lock can you help