Viewing all customer Discussions for:

Other

The latch original to the door fell down into the frame. I purchased the new latch and it is not sitting deep enough into the frame for the door handles with locking mechanism to line up with the slot on the latch. I don't know if the original latch was 45 degree or straight. I am searching for a la ... (cont.)

This latch appears similar to the 26-321P internal Tilt Latch - with the exception that the width of my window latch is 3/4" not 15/16" as shown for the 26-132P internal tilt latch. Looking for a replacement latch. Thanks for your help!

Please see attached. Looking for replacement with possible option that will fit in black.

It is a double nylon wheel assembly that is 4 5/16 inches long by 11/16 inches thick by 1 inch high with 1 3/16 diameter OD nylon wheels.

Hi Looking for the part number of this part. Thanks

Hi, I'm looking for window cranks for my Marvin windows. The imprinted part number on the crank says PAT 0487.012. Color is white or off white. Thank you, Cathy

Looking for this tilt slide window latch. No markings/labels on window - suspect old CareFree window.

What are the part numbers for the rollers to the RayDoor aluminum patio door. Needing to order them.There are 2 rollers per door. Need to order 2 sets.

Can't tell from your website which if any of these can replace this part: Please advise. Thank you.

Hello,I am looking to replace the screen door for a CTG Tempered, 16 CFR 1201 II, SGCC 1923 3/16U.Thank you,George

I'm seeking to purchase a screen corner as seen in the attached images.

Hi, I am looking for corner keys for a Windgate Belmont Double Hung window. . Rating H R30 44x60

this hardware is back in 1999 the lock at the bottom doesn't work and we want to change it from brass to a nickel finish. the top to bottom dimension is 11" the bolt pattern in 6 1/4" and 8 3/4" i can get more information if needed is any of this possible? thank you in advance

I am trying to locate replacement vinyl stops for a window we have in our shop, I have attached pictures of what I am looking for.

Hi, Can you provide me with this or help me find where to get them?

One of the channel balances popped up and out of the window (not dropping down like so many Youtube videos show), not sure what's causing it, but I figured that I should replace them. I took the channel balance out and took some photos. Both the top shoe and bottom shoe have wings, and the stamp on ... (cont.)

Hi, I have three Gapco windows that will not remain open. After opening the window(s) the sash closes slides down and will not remain in the position I set. All the windows are the same size 34w x 30h, all are aluminum 2 of the windows need the left hand (looking from inside to outside) spiral t ... (cont.)

2-5/8" long top 3/4" wide 3/8" thick bottom 9/16" wide Snap in tilt latch from windows at least 20 yrs old. No names or numbers. Any help with fitting a new product would greatly be appreciated. Thank You, Dave

Can you identify this wheel? It's out of a sliding window.Call me with any questions Thank you, JD

In the pictures you will see both Pella and Anderson wood framed windows. I am looking for the screen attachment clips that go in the slots on the sides to hold the screens in. I'm thinking it may be a swivel that attaches with a rivet into the sides of the screen.