Viewing all customer Discussions for:

Other

Need the whole kit lock, lever handle strike plate

Weatherstripping.

Not sure which piece to order for replacement

I need this latch to unlock my window.

I am looking for the two latches to this window to keep it in the track. I am not sure of the make of the window.

I need a roller set for our sliding door, the reference on the item says "Delta 2103" Thanks

The sliding window latch pictured will no longer retract far enough to clear the keeper and allow the window to open. I am looking for the replacement part. I just ordered 90-323 but upon further review (and grabbing my glasses) the screw spacing measurement is not the same. I see no manufacturer ma ... (cont.)

The sashes for these balances are 24lbs 2oz. I would need 2 of them. I assume the sashes these would go to are around 20 to 25 lbs? I would need 2 complete assemblies

Would either 40-049 or 40-097 be a replacement for the existing. See pics below.L.

hi do you carry these parts, I will need the slide and the crank opener. thanks Mark

#'s 6.679.000 4.610.108 D467.490 This is the numbers on the pet that I attached to this file. Thank you.

I don't know how to remove the coil balance system to see what model or size

Couldnt find a tag on the window for a model. Only the brand name harvey

Swisco, Here is couple pictures of the side of the screen that I need the replacement part for it. Let me know if that helps and if you need more info. Thank you so much, Marcelo

How do you replace just the roller , or does the entire bottom rail of door need replaced

Questions: I need to replace the push-pull window tracker with stamp 3250, the channel length is 33", the track also have another number 32 5 BM CMC 32 5 FU CMC 2 32 9 CW CMC What are those number 32 5 xx yy mean. so, which one is the correct replacement part.

I need a replacement but can't determine the weight. Length is 30"

Need a replacement channek balance. Length is 32 1/4", there is a stamped number on the balance (1460)

The length is 3 11/16

I am replacing my casement vent windows! I have the replacement crank #OP06-1505 (original crank # 0P052020). I do not have the new sill hardware that the crank mechanism would attach to. Can you help me find the parts I need. Note the rusted sill plate and sliding rod. I would need a left and righ ... (cont.)