Viewing all customer Discussions for:

Other

Hello! I have a vinyl window. The lower sash has a "shoe" that should stay with the sash, but is broken, and stays at bottom. Do you have replacement shoe? at the top of the sash frame, there is a little plastic tab that prevents the sash from dislodging from frame. I don't see any tension rods ... (cont.)

Our 1600 Series SGD glass door does not open and it appears the plastic strip at the bottom came away from the end and looks buckled. Can you ID this part and can you help me locate it? Thank you!

I'm not seeing one with my foot, in your store

Was wondering if you would have anything that would fit or substitute. Using a mic the height of the sealing part of gasket is .15. Total height is .35. Total width is .23. This runs along the inside of all the door contact surfaces both inside and out. There is a groove in the stationary part o ... (cont.)

I am looking to get some of these rollers for my sliding screen doors.

Disregard the tape, it was broken off, only way to get a picture. Door was made around 80/90's, no name, this is an outside seal that fits in a slot vertically

looking for awning window operator 39-070 need the mounting bracket

26 9 B.S.I PP

Need to identify part for replacement of window latch

I have 3 of these old sliding glass patio doors (circa 1976) that the handles or more specifically the lock mechanism is broken and or missing. They are mounted on the glass side and the screws are apx 3.5" apart and screwed thru from the front (strike side) of the frame, see photos. A clamp or fram ... (cont.)

Looking for this part

Looking to replace this. Can you identify and do you carry?

I am looking to purchase 4-complete sets of Patio door hardware as well as 4- of the multi-point mortise latch. The tag on the door reads as follows #5800 Series door original date 2/19 Silverline PO# 1586SC210 I have 48 plus units with these Patio Doors and they are starting to go bad. ... (cont.)

-Hello,I had installed Quality cabinetry in my carpenter's personal kitchen fifteen years ago, and some of these clips are coming apart, and/or falling apart. we had a few of the right side drawer clips shown, but none for the left side underneath the box. please let me know if you or someone has ... (cont.)

problems getting window to stay in, I think the shoe is different. I will attach pictures maybe you can help me. the new one broke trying to get it in and you can still see the old one.

It's an Alcon part that covers where the window crank would go.

I am trying to replace vinyl window glazing on a Krest Mark Series 100 window. The picture shows how the glazing looks on the window and what the end of it looks like.Please let if you have avaiable.Thanks Brad

Is the door strike plate included? I will need need one. My trim plate has mounted posts on it for machine screws thru inside trim plate. Your trim plates mount with wood screws but my door has 1/4" holes where your screws go. Also your strike plate does not have the 90 degree roll. Please advi ... (cont.)

I am looking for the pins that screw in at the top of the screens and can't find them. I attached a picture of the pin I took off on one of the screens as an example of what I need.

I'm looking for the hing hardware and how to replace operating arm seems to work ok